/** ****************************************************************************** * @file stm32f0xx_hal_exti.h * @author MCD Application Team * @brief Header file of EXTI HAL module. ****************************************************************************** * @attention * *

© Copyright (c) 2019 STMicroelectronics. * All rights reserved.

* * This software component is licensed by ST under BSD 3-Clause license, * the "License"; You may not use this file except in compliance with the * License. You may obtain a copy of the License at: * opensource.org/licenses/BSD-3-Clause * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef STM32F0xx_HAL_EXTI_H #define STM32F0xx_HAL_EXTI_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f0xx_hal_def.h" /** @addtogroup STM32F0xx_HAL_Driver * @{ */ /** @defgroup EXTI EXTI * @brief EXTI HAL module driver * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup EXTI_Exported_Types EXTI Exported Types * @{ */ /** * @brief HAL EXTI common Callback ID enumeration definition */ typedef enum { HAL_EXTI_COMMON_CB_ID = 0x00U } EXTI_CallbackIDTypeDef; /** * @brief EXTI Handle structure definition */ typedef struct { uint32_t Line; /*!< Exti line number */ void (* PendingCallback)(void); /*!< Exti pending callback */ } EXTI_HandleTypeDef; /** * @brief EXTI Configuration structure definition */ typedef struct { uint32_t Line; /*!< The Exti line to be configured. This parameter can be a value of @ref EXTI_Line */ uint32_t Mode; /*!< The Exit Mode to be configured for a core. This parameter can be a combination of @ref EXTI_Mode */ uint32_t Trigger; /*!< The Exti Trigger to be configured. This parameter can be a value of @ref EXTI_Trigger */ uint32_t GPIOSel; /*!< The Exti GPIO multiplexer selection to be configured. This parameter is only possible for line 0 to 15. It can be a value of @ref EXTI_GPIOSel */ } EXTI_ConfigTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup EXTI_Exported_Constants EXTI Exported Constants * @{ */ /** @defgroup EXTI_Line EXTI Line * @{ */ #define EXTI_LINE_0 (EXTI_GPIO | 0x00u) /*!< External interrupt line 0 */ #define EXTI_LINE_1 (EXTI_GPIO | 0x01u) /*!< External interrupt line 1 */ #define EXTI_LINE_2 (EXTI_GPIO | 0x02u) /*!< External interrupt line 2 */ #define EXTI_LINE_3 (EXTI_GPIO | 0x03u) /*!< External interrupt line 3 */ #define EXTI_LINE_4 (EXTI_GPIO | 0x04u) /*!< External interrupt line 4 */ #define EXTI_LINE_5 (EXTI_GPIO | 0x05u) /*!< External interrupt line 5 */ #define EXTI_LINE_6 (EXTI_GPIO | 0x06u) /*!< External interrupt line 6 */ #define EXTI_LINE_7 (EXTI_GPIO | 0x07u) /*!< External interrupt line 7 */ #define EXTI_LINE_8 (EXTI_GPIO | 0x08u) /*!< External interrupt line 8 */ #define EXTI_LINE_9 (EXTI_GPIO | 0x09u) /*!< External interrupt line 9 */ #define EXTI_LINE_10 (EXTI_GPIO | 0x0Au) /*!< External interrupt line 10 */ #define EXTI_LINE_11 (EXTI_GPIO | 0x0Bu) /*!< External interrupt line 11 */ #define EXTI_LINE_12 (EXTI_GPIO | 0x0Cu) /*!< External interrupt line 12 */ #define EXTI_LINE_13 (EXTI_GPIO | 0x0Du) /*!< External interrupt line 13 */ #define EXTI_LINE_14 (EXTI_GPIO | 0x0Eu) /*!< External interrupt line 14 */ #define EXTI_LINE_15 (EXTI_GPIO | 0x0Fu) /*!< External interrupt line 15 */ #if defined (EXTI_IMR_MR16) #define EXTI_LINE_16 (EXTI_CONFIG | 0x10u) /*!< External interrupt line 16 Connected to the PVD Output */ #else #define EXTI_LINE_16 (EXTI_RESERVED | 0x10u) #endif /* EXTI_IMR_MR16 */ #define EXTI_LINE_17 (EXTI_CONFIG | 0x11u) /*!< External interrupt line 17 Connected to the RTC Alarm event */ #if defined (EXTI_IMR_MR18) #define EXTI_LINE_18 (EXTI_CONFIG | 0x12u) /*!< External interrupt line 18 Connected to the USB OTG FS Wakeup from suspend event */ #else #define EXTI_LINE_18 (EXTI_RESERVED | 0x12u) #endif /* EXTI_IMR_MR18 */ #define EXTI_LINE_19 (EXTI_CONFIG | 0x13u) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ #if defined (EXTI_IMR_MR20) #define EXTI_LINE_20 (EXTI_CONFIG | 0x14u) /*!< External interrupt line 20 Connected to the USB OTG HS (configured in FS) Wakeup event */ #else #define EXTI_LINE_20 (EXTI_RESERVED | 0x14u) #endif /* EXTI_IMR_MR20 */ #if defined (EXTI_IMR_MR21) #define EXTI_LINE_21 (EXTI_CONFIG | 0x15u) /*!< External interrupt line 21 Connected to the Comparator 1 output */ #else #define EXTI_LINE_21 (EXTI_RESERVED | 0x15u) #endif /* EXTI_IMR_MR21 */ #if defined (EXTI_IMR_MR22) #define EXTI_LINE_22 (EXTI_CONFIG | 0x16u) /*!< External interrupt line 22 Connected to the Comparator 2 output */ #else #define EXTI_LINE_22 (EXTI_RESERVED | 0x16u) #endif /* EXTI_IMR_MR22 */ #if defined (EXTI_IMR_MR23) #define EXTI_LINE_23 (EXTI_DIRECT | 0x17u) /*!< External interrupt line 23 Connected to the internal I2C1 wakeup event */ #else #define EXTI_LINE_23 (EXTI_RESERVED | 0x17u) #endif /* EXTI_IMR_MR23 */ #define EXTI_LINE_24 (EXTI_RESERVED | 0x18u) #if defined (EXTI_IMR_MR25) #define EXTI_LINE_25 (EXTI_CONFIG | 0x19u) /*!< External interrupt line 25 Connected to the internal USART1 wakeup event */ #else #define EXTI_LINE_25 (EXTI_RESERVED | 0x19u) #endif /* EXTI_IMR_MR25 */ #if defined (EXTI_IMR_MR26) #define EXTI_LINE_26 (EXTI_CONFIG | 0x1Au) /*!< External interrupt line 26 Connected to the internal USART2 wakeup event */ #else #define EXTI_LINE_26 (EXTI_RESERVED | 0x1Au) #endif /* EXTI_IMR_MR26 */ #if defined (EXTI_IMR_MR27) #define EXTI_LINE_27 (EXTI_CONFIG | 0x1Bu) /*!< External interrupt line 27 Connected to the internal CEC wakeup event */ #else #define EXTI_LINE_27 (EXTI_RESERVED | 0x1Bu) #endif /* EXTI_IMR_MR27 */ #if defined (EXTI_IMR_MR28) #define EXTI_LINE_28 (EXTI_CONFIG | 0x1Cu) /*!< External interrupt line 28 Connected to the internal USART3 wakeup event */ #else #define EXTI_LINE_28 (EXTI_RESERVED | 0x1Cu) #endif /* EXTI_IMR_MR28 */ #define EXTI_LINE_29 (EXTI_RESERVED | 0x1Du) #define EXTI_LINE_30 (EXTI_RESERVED | 0x1Eu) #if defined (EXTI_IMR_MR31) #define EXTI_LINE_31 (EXTI_CONFIG | 0x1Fu) /*!< External interrupt line 31 Connected to the VDDIO2 supply comparator output */ #else #define EXTI_LINE_31 (EXTI_RESERVED | 0x1Fu) #endif /* EXTI_IMR_MR31 */ /** * @} */ /** @defgroup EXTI_Mode EXTI Mode * @{ */ #define EXTI_MODE_NONE 0x00000000u #define EXTI_MODE_INTERRUPT 0x00000001u #define EXTI_MODE_EVENT 0x00000002u /** * @} */ /** @defgroup EXTI_Trigger EXTI Trigger * @{ */ #define EXTI_TRIGGER_NONE 0x00000000u #define EXTI_TRIGGER_RISING 0x00000001u #define EXTI_TRIGGER_FALLING 0x00000002u #define EXTI_TRIGGER_RISING_FALLING (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) /** * @} */ /** @defgroup EXTI_GPIOSel EXTI GPIOSel * @brief * @{ */ #define EXTI_GPIOA 0x00000000u #define EXTI_GPIOB 0x00000001u #define EXTI_GPIOC 0x00000002u #if defined (GPIOD) #define EXTI_GPIOD 0x00000003u #endif /* GPIOD */ #if defined (GPIOE) #define EXTI_GPIOE 0x00000004u #endif /* GPIOE */ #define EXTI_GPIOF 0x00000005u /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup EXTI_Exported_Macros EXTI Exported Macros * @{ */ /** * @} */ /* Private constants --------------------------------------------------------*/ /** @defgroup EXTI_Private_Constants EXTI Private Constants * @{ */ /** * @brief EXTI Line property definition */ #define EXTI_PROPERTY_SHIFT 24u #define EXTI_DIRECT (0x01uL << EXTI_PROPERTY_SHIFT) #define EXTI_CONFIG (0x02uL << EXTI_PROPERTY_SHIFT) #define EXTI_GPIO ((0x04uL << EXTI_PROPERTY_SHIFT) | EXTI_CONFIG) #define EXTI_RESERVED (0x08uL << EXTI_PROPERTY_SHIFT) #define EXTI_PROPERTY_MASK (EXTI_DIRECT | EXTI_CONFIG | EXTI_GPIO) /** * @brief EXTI bit usage */ #define EXTI_PIN_MASK 0x0000001Fu /** * @brief EXTI Mask for interrupt & event mode */ #define EXTI_MODE_MASK (EXTI_MODE_EVENT | EXTI_MODE_INTERRUPT) /** * @brief EXTI Mask for trigger possibilities */ #define EXTI_TRIGGER_MASK (EXTI_TRIGGER_RISING | EXTI_TRIGGER_FALLING) /** * @brief EXTI Line number */ #define EXTI_LINE_NB 32uL /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup EXTI_Private_Macros EXTI Private Macros * @{ */ #define IS_EXTI_LINE(__EXTI_LINE__) ((((__EXTI_LINE__) & ~(EXTI_PROPERTY_MASK | EXTI_PIN_MASK)) == 0x00u) && \ ((((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_DIRECT) || \ (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_CONFIG) || \ (((__EXTI_LINE__) & EXTI_PROPERTY_MASK) == EXTI_GPIO)) && \ (((__EXTI_LINE__) & EXTI_PIN_MASK) < EXTI_LINE_NB)) #define IS_EXTI_MODE(__EXTI_LINE__) ((((__EXTI_LINE__) & EXTI_MODE_MASK) != 0x00u) && \ (((__EXTI_LINE__) & ~EXTI_MODE_MASK) == 0x00u)) #define IS_EXTI_TRIGGER(__EXTI_LINE__) (((__EXTI_LINE__) & ~EXTI_TRIGGER_MASK) == 0x00u) #define IS_EXTI_PENDING_EDGE(__EXTI_LINE__) ((__EXTI_LINE__) == EXTI_TRIGGER_RISING_FALLING) #define IS_EXTI_CONFIG_LINE(__EXTI_LINE__) (((__EXTI_LINE__) & EXTI_CONFIG) != 0x00u) #if defined (GPIOE) #define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ ((__PORT__) == EXTI_GPIOB) || \ ((__PORT__) == EXTI_GPIOC) || \ ((__PORT__) == EXTI_GPIOD) || \ ((__PORT__) == EXTI_GPIOE) || \ ((__PORT__) == EXTI_GPIOF)) #elif defined (GPIOD) #define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ ((__PORT__) == EXTI_GPIOB) || \ ((__PORT__) == EXTI_GPIOC) || \ ((__PORT__) == EXTI_GPIOD) || \ ((__PORT__) == EXTI_GPIOF)) #else #define IS_EXTI_GPIO_PORT(__PORT__) (((__PORT__) == EXTI_GPIOA) || \ ((__PORT__) == EXTI_GPIOB) || \ ((__PORT__) == EXTI_GPIOC) || \ ((__PORT__) == EXTI_GPIOF)) #endif /* GPIOE */ #define IS_EXTI_GPIO_PIN(__PIN__) ((__PIN__) < 16u) /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup EXTI_Exported_Functions EXTI Exported Functions * @brief EXTI Exported Functions * @{ */ /** @defgroup EXTI_Exported_Functions_Group1 Configuration functions * @brief Configuration functions * @{ */ /* Configuration functions ****************************************************/ HAL_StatusTypeDef HAL_EXTI_SetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); HAL_StatusTypeDef HAL_EXTI_GetConfigLine(EXTI_HandleTypeDef *hexti, EXTI_ConfigTypeDef *pExtiConfig); HAL_StatusTypeDef HAL_EXTI_ClearConfigLine(EXTI_HandleTypeDef *hexti); HAL_StatusTypeDef HAL_EXTI_RegisterCallback(EXTI_HandleTypeDef *hexti, EXTI_CallbackIDTypeDef CallbackID, void (*pPendingCbfn)(void)); HAL_StatusTypeDef HAL_EXTI_GetHandle(EXTI_HandleTypeDef *hexti, uint32_t ExtiLine); /** * @} */ /** @defgroup EXTI_Exported_Functions_Group2 IO operation functions * @brief IO operation functions * @{ */ /* IO operation functions *****************************************************/ void HAL_EXTI_IRQHandler(EXTI_HandleTypeDef *hexti); uint32_t HAL_EXTI_GetPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); void HAL_EXTI_ClearPending(EXTI_HandleTypeDef *hexti, uint32_t Edge); void HAL_EXTI_GenerateSWI(EXTI_HandleTypeDef *hexti); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* STM32F0xx_HAL_EXTI_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/