jochen/stm32cubeide
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
stm32cubeide/CDC/Drivers/STM32G0xx_HAL_Driver/Src/stm32g0xx_ll_usb.c
Jochen Friedrich 66c5a26d69 Initial commit
2021-01-01 14:06:20 +01:00

1348 lines
37 KiB
C
Raw Blame History

/**
******************************************************************************
* @file stm32g0xx_ll_usb.c
* @author MCD Application Team
* @brief USB Low Layer HAL module driver.
*
* This file provides firmware functions to manage the following
* functionalities of the USB Peripheral Controller:
* + Initialization/de-initialization functions
* + I/O operation functions
* + Peripheral Control functions
* + Peripheral State functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
(#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
(#) Call USB_CoreInit() API to initialize the USB Core peripheral.
(#) The upper HAL HCD/PCD driver will call the right routines for its internal processes.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32g0xx_hal.h"
/** @addtogroup STM32G0xx_LL_USB_DRIVER
* @{
*/
#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED)
#if defined (USB_DRD_FS)
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
static HAL_StatusTypeDef USB_CoreReset(USB_DRD_TypeDef *USBx);
static HAL_StatusTypeDef USB_HC_BULK_DB_StartXfer(USB_DRD_TypeDef *USBx,
USB_DRD_HCTypeDef *hc,
uint32_t ch_reg,
uint32_t *len);
static HAL_StatusTypeDef USB_HC_ISO_DB_StartXfer(USB_DRD_TypeDef *USBx,
USB_DRD_HCTypeDef *hc,
uint32_t len);
/**
* @brief Reset the USB Core (needed after USB clock settings change)
* @param USBx Selected device
* @retval HAL status
*/
static HAL_StatusTypeDef USB_CoreReset(USB_DRD_TypeDef *USBx)
{
/* Disable Host Mode */
USBx->CNTR &= ~USB_CNTR_HOST;
/* Force Reset IP */
USBx->CNTR |= USB_CNTR_USBRST;
return HAL_OK;
}
/**
* @brief Initializes the USB Core
* @param USBx USB Instance
* @param cfg pointer to a USB_CfgTypeDef structure that contains
* the configuration information for the specified USBx peripheral.
* @retval HAL status
*/
HAL_StatusTypeDef USB_CoreInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg)
{
UNUSED(cfg);
HAL_StatusTypeDef state;
/* Reset after a PHY select */
state = USB_CoreReset(USBx);
/* Clear pending interrupts */
USBx->ISTR = 0U;
return state;
}
/**
* @brief USB_EnableGlobalInt
* Enables the controller's Global Int in the AHB Config reg
* @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_EnableGlobalInt(USB_DRD_TypeDef *USBx)
{
uint32_t winterruptmask;
/* Clear pending interrupts */
USBx->ISTR = 0U;
/* Set winterruptmask variable */
winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM |
USB_CNTR_SUSPM | USB_CNTR_ERRM |
USB_CNTR_SOFM | USB_CNTR_ESOFM |
USB_CNTR_RESETM | USB_CNTR_L1REQM;
/* Set interrupt mask */
USBx->CNTR = winterruptmask;
return HAL_OK;
}
/**
* @brief USB_DisableGlobalInt
* Disable the controller's Global Int in the AHB Config reg
* @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_DisableGlobalInt(USB_DRD_TypeDef *USBx)
{
uint32_t winterruptmask;
/* Set winterruptmask variable */
winterruptmask = USB_CNTR_CTRM | USB_CNTR_WKUPM |
USB_CNTR_SUSPM | USB_CNTR_ERRM |
USB_CNTR_SOFM | USB_CNTR_ESOFM |
USB_CNTR_RESETM | USB_CNTR_L1REQM;
/* Clear interrupt mask */
USBx->CNTR &= ~winterruptmask;
return HAL_OK;
}
/**
* @brief USB_SetCurrentMode Set functional mode
* @param USBx Selected device
* @param mode current core mode
* This parameter can be one of the these values:
* @arg USB_DEVICE_MODE Peripheral mode
* @retval HAL status
*/
HAL_StatusTypeDef USB_SetCurrentMode(USB_DRD_TypeDef *USBx, USB_DRD_ModeTypeDef mode)
{
if (mode == USB_DEVICE_MODE)
{
USBx->CNTR &= ~USB_CNTR_HOST;
}
else
{
USBx->CNTR |= USB_CNTR_HOST;
}
return HAL_OK;
}
/**
* @brief USB_DevInit Initializes the USB controller registers
* for device mode
* @param USBx Selected device
* @param cfg pointer to a USB_DRD_CfgTypeDef structure that contains
* the configuration information for the specified USBx peripheral.
* @retval HAL status
*/
HAL_StatusTypeDef USB_DevInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(cfg);
/* Force Reset */
USBx->CNTR = USB_CNTR_USBRST;
/* Release Reset */
USBx->CNTR &= ~USB_CNTR_USBRST;
/* Set the Device Mode */
(void)USB_SetCurrentMode(USBx, USB_DEVICE_MODE);
/* Clear pending interrupts */
USBx->ISTR = 0U;
return HAL_OK;
}
#if defined (HAL_PCD_MODULE_ENABLED)
/**
* @brief Activate and configure an endpoint
* @param USBx Selected device
* @param ep pointer to endpoint structure
* @retval HAL status
*/
HAL_StatusTypeDef USB_ActivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep)
{
HAL_StatusTypeDef ret = HAL_OK;
uint32_t wEpRegVal;
wEpRegVal = PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_T_MASK;
/* initialize Endpoint */
switch (ep->type)
{
case EP_TYPE_CTRL:
wEpRegVal |= USB_EP_CONTROL;
break;
case EP_TYPE_BULK:
wEpRegVal |= USB_EP_BULK;
break;
case EP_TYPE_INTR:
wEpRegVal |= USB_EP_INTERRUPT;
break;
case EP_TYPE_ISOC:
wEpRegVal |= USB_EP_ISOCHRONOUS;
break;
default:
ret = HAL_ERROR;
break;
}
PCD_SET_ENDPOINT(USBx, ep->num, (wEpRegVal | USB_EP_VTRX | USB_EP_VTTX));
PCD_SET_EP_ADDRESS(USBx, ep->num, ep->num);
if (ep->doublebuffer == 0U)
{
if (ep->is_in != 0U)
{
/*Set the endpoint Transmit buffer address */
PCD_SET_EP_TX_ADDRESS(USBx, ep->num, ep->pmaadress);
PCD_CLEAR_TX_DTOG(USBx, ep->num);
if (ep->type != EP_TYPE_ISOC)
{
/* Configure NAK status for the Endpoint */
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK);
}
else
{
/* Configure TX Endpoint to disabled state */
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
}
}
else
{
/*Set the endpoint Receive buffer address */
PCD_SET_EP_RX_ADDRESS(USBx, ep->num, ep->pmaadress);
/*Set the endpoint Receive buffer counter*/
PCD_SET_EP_RX_CNT(USBx, ep->num, ep->maxpacket);
PCD_CLEAR_RX_DTOG(USBx, ep->num);
/* Configure VALID status for the Endpoint*/
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
}
}
/*Double Buffer*/
else
{
/* Set the endpoint as double buffered */
PCD_SET_EP_DBUF(USBx, ep->num);
/* Set buffer address for double buffered mode */
PCD_SET_EP_DBUF_ADDR(USBx, ep->num, ep->pmaaddr0, ep->pmaaddr1);
if (ep->is_in == 0U)
{
/* Clear the data toggle bits for the endpoint IN/OUT */
PCD_CLEAR_RX_DTOG(USBx, ep->num);
PCD_CLEAR_TX_DTOG(USBx, ep->num);
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
}
else
{
/* Clear the data toggle bits for the endpoint IN/OUT */
PCD_CLEAR_RX_DTOG(USBx, ep->num);
PCD_CLEAR_TX_DTOG(USBx, ep->num);
if (ep->type != EP_TYPE_ISOC)
{
/* Configure NAK status for the Endpoint */
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK);
}
else
{
/* Configure TX Endpoint to disabled state */
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
}
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
}
}
return ret;
}
/**
* @brief De-activate and de-initialize an endpoint
* @param USBx Selected device
* @param ep pointer to endpoint structure
* @retval HAL status
*/
HAL_StatusTypeDef USB_DeactivateEndpoint(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep)
{
if (ep->doublebuffer == 0U)
{
if (ep->is_in != 0U)
{
PCD_CLEAR_TX_DTOG(USBx, ep->num);
/* Configure DISABLE status for the Endpoint*/
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
}
else
{
PCD_CLEAR_RX_DTOG(USBx, ep->num);
/* Configure DISABLE status for the Endpoint*/
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
}
}
/*Double Buffer*/
else
{
if (ep->is_in == 0U)
{
/* Clear the data toggle bits for the endpoint IN/OUT*/
PCD_CLEAR_RX_DTOG(USBx, ep->num);
PCD_CLEAR_TX_DTOG(USBx, ep->num);
/* Reset value of the data toggle bits for the endpoint out*/
PCD_TX_DTOG(USBx, ep->num);
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
}
else
{
/* Clear the data toggle bits for the endpoint IN/OUT*/
PCD_CLEAR_RX_DTOG(USBx, ep->num);
PCD_CLEAR_TX_DTOG(USBx, ep->num);
PCD_RX_DTOG(USBx, ep->num);
/* Configure DISABLE status for the Endpoint*/
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_DIS);
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_DIS);
}
}
return HAL_OK;
}
/**
* @brief USB_EPStartXfer setup and starts a transfer over an EP
* @param USBx Selected device
* @param ep pointer to endpoint structure
* @retval HAL status
*/
HAL_StatusTypeDef USB_EPStartXfer(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep)
{
uint32_t len;
uint16_t pmabuffer;
uint16_t wEPVal;
/* IN endpoint */
if (ep->is_in == 1U)
{
/*Multi packet transfer*/
if (ep->xfer_len > ep->maxpacket)
{
len = ep->maxpacket;
}
else
{
len = ep->xfer_len;
}
/* configure and validate Tx endpoint */
if (ep->doublebuffer == 0U)
{
USB_WritePMA(USBx, ep->xfer_buff, ep->pmaadress, (uint16_t)len);
PCD_SET_EP_TX_CNT(USBx, ep->num, len);
}
else
{
/* double buffer bulk management */
if (ep->type == EP_TYPE_BULK)
{
if (ep->xfer_len_db > ep->maxpacket)
{
/* enable double buffer */
PCD_SET_EP_DBUF(USBx, ep->num);
/* each Time to write in PMA xfer_len_db will */
ep->xfer_len_db -= len;
/* Fill the two first buffer in the Buffer0 & Buffer1 */
if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U)
{
/* Set the Double buffer counter for pmabuffer1 */
PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr1;
/* Write the user buffer to USB PMA */
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
ep->xfer_buff += len;
if (ep->xfer_len_db > ep->maxpacket)
{
ep->xfer_len_db -= len;
}
else
{
len = ep->xfer_len_db;
ep->xfer_len_db = 0U;
}
/* Set the Double buffer counter for pmabuffer0 */
PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr0;
/* Write the user buffer to USB PMA */
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
}
else
{
/* Set the Double buffer counter for pmabuffer0 */
PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr0;
/* Write the user buffer to USB PMA */
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
ep->xfer_buff += len;
if (ep->xfer_len_db > ep->maxpacket)
{
ep->xfer_len_db -= len;
}
else
{
len = ep->xfer_len_db;
ep->xfer_len_db = 0U;
}
/* Set the Double buffer counter for pmabuffer1 */
PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr1;
/* Write the user buffer to USB PMA */
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
}
}
/* auto Switch to single buffer mode when transfer <Mps no need to manage in double buffer */
else
{
len = ep->xfer_len_db;
/* disable double buffer mode */
PCD_CLEAR_EP_DBUF(USBx, ep->num);
/* Set Tx count with nbre of byte to be transmitted */
PCD_SET_EP_TX_CNT(USBx, ep->num, len);
pmabuffer = ep->pmaaddr0;
/* Write the user buffer to USB PMA */
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
}
}/* end if bulk double buffer */
/* manage isochronous double buffer IN mode */
else
{
/* Write the data to the USB endpoint */
if ((PCD_GET_ENDPOINT(USBx, ep->num) & USB_EP_DTOG_TX) != 0U)
{
/* Set the Double buffer counter for pmabuffer1 */
PCD_SET_EP_DBUF1_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr1;
}
else
{
/* Set the Double buffer counter for pmabuffer0 */
PCD_SET_EP_DBUF0_CNT(USBx, ep->num, ep->is_in, len);
pmabuffer = ep->pmaaddr0;
}
USB_WritePMA(USBx, ep->xfer_buff, pmabuffer, (uint16_t)len);
PCD_FreeUserBuffer(USBx, ep->num, ep->is_in);
}
}
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_VALID);
}
else /* OUT endpoint */
{
if (ep->doublebuffer == 0U)
{
/* Multi packet transfer */
if (ep->xfer_len > ep->maxpacket)
{
len = ep->maxpacket;
ep->xfer_len -= len;
}
else
{
len = ep->xfer_len;
ep->xfer_len = 0U;
}
/* configure and validate Rx endpoint */
PCD_SET_EP_RX_CNT(USBx, ep->num, len);
}
else
{
/* First Transfer Coming From HAL_PCD_EP_Receive & From ISR */
/* Set the Double buffer counter */
if (ep->type == EP_TYPE_BULK)
{
PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, ep->maxpacket);
/* Coming from ISR */
if (ep->xfer_count != 0U)
{
/* update last value to check if there is blocking state */
wEPVal = (uint16_t)PCD_GET_ENDPOINT(USBx, ep->num);
/*Blocking State */
if ((((wEPVal & USB_EP_DTOG_RX) != 0U) && ((wEPVal & USB_EP_DTOG_TX) != 0U)) ||
(((wEPVal & USB_EP_DTOG_RX) == 0U) && ((wEPVal & USB_EP_DTOG_TX) == 0U)))
{
PCD_FreeUserBuffer(USBx, ep->num, 0U);
}
}
}
/* iso out double */
else if (ep->type == EP_TYPE_ISOC)
{
/* Multi packet transfer */
if (ep->xfer_len > ep->maxpacket)
{
len = ep->maxpacket;
ep->xfer_len -= len;
}
else
{
len = ep->xfer_len;
ep->xfer_len = 0U;
}
PCD_SET_EP_DBUF_CNT(USBx, ep->num, ep->is_in, len);
}
else
{
return HAL_ERROR;
}
}
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
}
return HAL_OK;
}
/**
* @brief USB_EPSetStall set a stall condition over an EP
* @param USBx Selected device
* @param ep pointer to endpoint structure
* @retval HAL status
*/
HAL_StatusTypeDef USB_EPSetStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep)
{
if (ep->is_in != 0U)
{
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_STALL);
}
else
{
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_STALL);
}
return HAL_OK;
}
/**
* @brief USB_EPClearStall Clear a stall condition over an EP
* @param USBx Selected device
* @param ep pointer to endpoint structure
* @retval HAL status
*/
HAL_StatusTypeDef USB_EPClearStall(USB_DRD_TypeDef *USBx, USB_DRD_EPTypeDef *ep)
{
if (ep->doublebuffer == 0U)
{
if (ep->is_in != 0U)
{
PCD_CLEAR_TX_DTOG(USBx, ep->num);
if (ep->type != EP_TYPE_ISOC)
{
/* Configure NAK status for the Endpoint */
PCD_SET_EP_TX_STATUS(USBx, ep->num, USB_EP_TX_NAK);
}
}
else
{
PCD_CLEAR_RX_DTOG(USBx, ep->num);
/* Configure VALID status for the Endpoint */
PCD_SET_EP_RX_STATUS(USBx, ep->num, USB_EP_RX_VALID);
}
}
return HAL_OK;
}
#endif
/**
* @brief USB_StopDevice Stop the usb device mode
* @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_StopDevice(USB_DRD_TypeDef *USBx)
{
/* disable all interrupts and force USB reset */
USBx->CNTR = USB_CNTR_USBRST;
/* clear interrupt status register */
USBx->ISTR = 0U;
/* switch-off device */
USBx->CNTR = (USB_CNTR_USBRST | USB_CNTR_PDWN);
return HAL_OK;
}
/**
* @brief USB_SetDevAddress Stop the usb device mode
* @param USBx Selected device
* @param address new device address to be assigned
* This parameter can be a value from 0 to 255
* @retval HAL status
*/
HAL_StatusTypeDef USB_SetDevAddress(USB_DRD_TypeDef *USBx, uint8_t address)
{
if (address == 0U)
{
/* set device address and enable function */
USBx->DADDR = USB_DADDR_EF;
}
return HAL_OK;
}
/**
* @brief USB_DevConnect Connect the USB device by enabling the pull-up/pull-down
* @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_DevConnect(USB_DRD_TypeDef *USBx)
{
/* Enabling DP Pull-UP bit to Connect internal PU resistor on USB DP line */
USBx->BCDR |= USB_BCDR_DPPU;
return HAL_OK;
}
/**
* @brief USB_DevDisconnect Disconnect the USB device by disabling the pull-up/pull-down
* @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_DevDisconnect(USB_DRD_TypeDef *USBx)
{
/* Disable DP Pull-Up bit to disconnect the Internal PU resistor on USB DP line */
USBx->BCDR &= ~(USB_BCDR_DPPU);
return HAL_OK;
}
/**
* @brief USB_ReadInterrupts return the global USB interrupt status
* @param USBx Selected device
* @retval HAL status
*/
uint32_t USB_ReadInterrupts(USB_DRD_TypeDef *USBx)
{
uint32_t tmpreg;
tmpreg = USBx->ISTR;
return tmpreg;
}
/**
* @brief USB_ActivateRemoteWakeup : active remote wakeup signalling
* @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_ActivateRemoteWakeup(USB_DRD_TypeDef *USBx)
{
USBx->CNTR |= USB_CNTR_L2RES;
return HAL_OK;
}
/**
* @brief USB_DeActivateRemoteWakeup de-active remote wakeup signalling
* @param USBx Selected device
* @retval HAL status
*/
HAL_StatusTypeDef USB_DeActivateRemoteWakeup(USB_DRD_TypeDef *USBx)
{
USBx->CNTR &= ~USB_CNTR_L2RES;
return HAL_OK;
}
/**
* @brief Copy a buffer from user memory area to packet memory area (PMA)
* @param USBx USB peripheral instance register address.
* @param pbUsrBuf pointer to user memory area.
* @param wPMABufAddr address into PMA.
* @param wNBytes no. of bytes to be copied.
* @retval None
*/
void USB_WritePMA(USB_DRD_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
{
UNUSED(USBx);
uint32_t count, tmp;
__IO uint32_t *pdwVal;
uint32_t NbWords = ((uint32_t)wNBytes + 3U) >> 2U;
/* Due to the PMA access 32bit only so the last non word data should be processed alone */
uint16_t remaining_bytes = wNBytes % 4U;
uint8_t *pBuf = pbUsrBuf;
/* Check if there is a remaining byte */
if (remaining_bytes != 0U)
{
NbWords--;
}
/* Get the PMA Buffer pointer */
pdwVal = (__IO uint32_t *)(USB_DRD_PMAADDR + (uint32_t)wPMABufAddr);
/* Write the Calculated Word into the PMA related Buffer */
for (count = NbWords; count != 0U; count--)
{
*pdwVal = __UNALIGNED_UINT32_READ(pBuf);
pdwVal++;
/* Increment pBuf 4 Time as Word Increment */
pBuf++;
pBuf++;
pBuf++;
pBuf++;
}
/* When Number of data is not word aligned, write the remaining Byte */
if (remaining_bytes != 0U)
{
count = 0U;
tmp = 0U;
do
{
tmp = tmp | ((uint32_t)(*(uint8_t *)pBuf) << (8U * count));
count++;
pBuf++;
remaining_bytes--;
} while (remaining_bytes != 0U);
*pdwVal = tmp;
}
}
/**
* @brief Copy data from packet memory area (PMA) to user memory buffer
* @param USBx USB peripheral instance register address.
* @param pbUsrBuf pointer to user memory area.
* @param wPMABufAddr address into PMA.
* @param wNBytes no. of bytes to be copied.
* @retval None
*/
void USB_ReadPMA(USB_DRD_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes)
{
UNUSED(USBx);
uint32_t count, tmp;
__IO uint32_t *pdwVal;
uint32_t NbWords = ((uint32_t)wNBytes + 3U) >> 2U;
/*Due to the PMA access 32bit only so the last non word data should be processed alone */
uint16_t remaining_bytes = wNBytes % 4U;
uint8_t *pBuf = pbUsrBuf;
/* Get the PMA Buffer pointer */
pdwVal = (__IO uint32_t *)(USB_DRD_PMAADDR + (uint32_t)wPMABufAddr);
/* if nbre of byte is not word aligned decrement the nbre of word*/
if (remaining_bytes != 0U)
{
NbWords--;
}
/*Read the Calculated Word From the PMA related Buffer*/
for (count = NbWords; count != 0U; count--)
{
__UNALIGNED_UINT32_WRITE(pBuf, *pdwVal);
pdwVal++;
pBuf++;
pBuf++;
pBuf++;
pBuf++;
}
/*When Number of data is not word aligned, read the remaining byte*/
if (remaining_bytes != 0U)
{
count = 0U;
tmp = *(__IO uint32_t *)pdwVal;
do
{
*(uint8_t *)pBuf = (uint8_t)(tmp >> (8U * (uint8_t)(count)));
count++;
pBuf++;
remaining_bytes-- ;
} while (remaining_bytes != 0U);
}
}
/*------------------------------------------------------------------------*/
/* HOST API */
/*------------------------------------------------------------------------*/
/**
* @brief USB_HostInit Initializes the USB DRD controller registers
* for Host mode
* @param USBx Selected device
* @param cfg pointer to a USB_DRD_CfgTypeDef structure that contains
* the configuration information for the specified USBx peripheral.
* @retval HAL status
*/
HAL_StatusTypeDef USB_HostInit(USB_DRD_TypeDef *USBx, USB_DRD_CfgTypeDef cfg)
{
UNUSED(cfg);
/* Clear All Pending Interrupt */
USBx->ISTR = 0U;
HAL_Delay(200);
/* Disable all interrupts */
USBx->CNTR &= ~(USB_CNTR_CTRM | USB_CNTR_PMAOVRM | USB_CNTR_ERRM |
USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_DCON |
USB_CNTR_SOFM | USB_CNTR_ESOFM | USB_CNTR_L1REQM);
/* Clear All Pending Interrupt */
USBx->ISTR = 0U;
/*Enable Global interrupt */
USBx->CNTR |= (USB_CNTR_CTRM | USB_CNTR_PMAOVRM | USB_CNTR_ERRM |
USB_CNTR_WKUPM | USB_CNTR_SUSPM | USB_CNTR_DCON |
USB_CNTR_SOFM | USB_CNTR_ESOFM | USB_CNTR_L1REQM);
/* Remove Reset */
USBx->CNTR &= ~USB_CNTR_USBRST;
return HAL_OK;
}
/**
* @brief USB_DRD_ResetPort : Reset Host Port
* @param USBx Selected device
* @retval HAL status
* @note (1)The application must wait at least 10 ms
* before clearing the reset bit.
*/
HAL_StatusTypeDef USB_ResetPort(USB_DRD_TypeDef *USBx)
{
/* Force USB Reset */
USBx->CNTR |= USB_CNTR_USBRST;
HAL_Delay(100);
/* Release USB Reset */
USBx->CNTR &= ~USB_CNTR_USBRST;
HAL_Delay(30);
return HAL_OK;
}
/**
* @brief Return Host Core speed
* @param USBx Selected device
* @retval speed Host speed
* This parameter can be one of these values
* @arg USB_DRD_SPEED_FULL Full speed mode
* @arg USB_DRD_SPEED_LOW Low speed mode
*/
uint32_t USB_GetHostSpeed(USB_DRD_TypeDef *USBx)
{
if ((USBx->ISTR & USB_ISTR_LS_DCONN) != 0U)
{
return USB_DRD_SPEED_LS;
}
else
{
return USB_DRD_SPEED_FS;
}
}
/**
* @brief Return Host Current Frame number
* @param USBx Selected device
* @retval current frame number
*/
uint32_t USB_GetCurrentFrame(USB_DRD_TypeDef *USBx)
{
return USBx->FNR & 0x7FFU;
}
/**
* @brief Set the channel Kind (Single/double buffer mode)
* @param USBx Selected device
* @param phy_ch_num Selected device
* @param db_state double state can be USB_DRD_DBUFF_ENBALE/USB_DRD_DBUFF_DISABLE
* @retval HAL status
*/
HAL_StatusTypeDef USB_HC_DoubleBuffer(USB_DRD_TypeDef *USBx,
uint8_t phy_ch_num, uint8_t db_state)
{
uint32_t tmp;
if (db_state == USB_DRD_DBUFF_ENBALE)
{
tmp = (USB_DRD_GET_CHEP(USBx, phy_ch_num) | USB_CH_KIND) & USB_CHEP_DB_MSK;
}
else
{
tmp = USB_DRD_GET_CHEP(USBx, phy_ch_num) & (~USB_CH_KIND) & USB_CHEP_DB_MSK;
}
/* Set the device speed in case using HUB FS with device LS */
USB_DRD_SET_CHEP(USBx, phy_ch_num, tmp);
return HAL_OK;
}
/**
* @brief Initialize a host channel
* @param USBx Selected device
* @param phy_ch_num Channel number
* This parameter can be a value from 1 to 15
* @param epnum Endpoint number
* This parameter can be a value from 1 to 15
* @param dev_address Current device address
* This parameter can be a value from 0 to 255
* @param speed Current device speed
* This parameter can be one of these values:
* @arg USB_DRD_SPEED_FULL Full speed mode
* @arg USB_DRD_SPEED_LOW Low speed mode
* @param ep_type Endpoint Type
* This parameter can be one of these values:
* @arg EP_TYPE_CTRL Control type
* @arg EP_TYPE_ISOC Isochronous type
* @arg EP_TYPE_BULK Bulk type
* @arg EP_TYPE_INTR Interrupt type
* @param mps Max Packet Size
* This parameter can be a value from 0 to 32K
* @retval HAL state
*/
HAL_StatusTypeDef USB_HC_Init(USB_DRD_TypeDef *USBx, uint8_t phy_ch_num,
uint8_t epnum, uint8_t dev_address, uint8_t speed,
uint8_t ep_type, uint16_t mps)
{
HAL_StatusTypeDef ret = HAL_OK;
uint32_t wChRegVal;
wChRegVal = USB_DRD_GET_CHEP(USBx, phy_ch_num) & USB_CH_T_MASK;
/* initialize host Channel */
switch (ep_type)
{
case EP_TYPE_CTRL:
wChRegVal |= USB_EP_CONTROL;
break;
case EP_TYPE_BULK:
wChRegVal |= USB_EP_BULK;
break;
case EP_TYPE_INTR:
wChRegVal |= USB_EP_INTERRUPT;
break;
case EP_TYPE_ISOC:
wChRegVal |= USB_EP_ISOCHRONOUS;
break;
default:
ret = HAL_ERROR;
break;
}
wChRegVal &= ~USB_CHEP_DEVADDR;
wChRegVal |= (((uint32_t)dev_address << USB_CHEP_DEVADDR_Pos) |
((uint32_t)epnum & 0x0FU));
/* Set the device speed in case using HUB FS with device LS */
if (speed == USB_DRD_SPEED_LSFS)
{
wChRegVal |= USB_CHEP_LSEP;
}
/* Set the dev_address & ep type */
USB_DRD_SET_CHEP(USBx, phy_ch_num, (wChRegVal | USB_CH_VTRX | USB_CH_VTTX));
/*Set the Rx Count */
USB_DRD_SET_CHEP_RX_CNT(USBx, phy_ch_num, mps);
return ret;
}
/**
* @brief Start a transfer over a host channel
* @param USBx Selected device
* @param hc pointer to host channel structure
* @retval HAL state
*/
HAL_StatusTypeDef USB_HC_StartXfer(USB_DRD_TypeDef *USBx,
USB_DRD_HCTypeDef *hc)
{
uint32_t len;
uint32_t phy_ch_num = (uint32_t)hc->phy_ch_num;
uint32_t ch_reg = USB_DRD_GET_CHEP(USBx, phy_ch_num);
if (hc->ch_dir == CH_IN_DIR) /* In Channel */
{
/* Multi packet transfer */
if (hc->xfer_len > hc->max_packet)
{
len = hc->max_packet;
}
else
{
len = hc->xfer_len;
}
if (hc->doublebuffer == 0U)
{
/* Set RX buffer count */
USB_DRD_SET_CHEP_RX_CNT(USBx, phy_ch_num, len);
}
else if (hc->ep_type == EP_TYPE_BULK)
{
/* Double buffer activated */
if ((hc->xfer_len > hc->max_packet))
{
(void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_DBUFF_ENBALE);
/*Set the Double buffer counter*/
USB_DRD_SET_CHEP_DBUF_CNT(USBx, phy_ch_num, hc->ch_dir, len);
}
else /* switch to single buffer mode */
{
(void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_DBUFF_DISABLE);
/* Set RX buffer count */
USB_DRD_SET_CHEP_RX_CNT(USBx, phy_ch_num, len);
}
}
else /* isochronous */
{
/*Set the Double buffer counter*/
USB_DRD_SET_CHEP_DBUF_CNT(USBx, phy_ch_num, hc->ch_dir, len);
}
/*Enable host channel */
USB_DRD_SET_CHEP_RX_STATUS(USBx, phy_ch_num, USB_CHEP_RX_STRX);
}
else /* Out Channel */
{
/* Multi packet transfer*/
if (hc->xfer_len > hc->max_packet)
{
len = hc->max_packet;
}
else
{
len = hc->xfer_len;
}
/* configure and validate Tx endpoint */
if (hc->doublebuffer == 0U)
{
USB_WritePMA(USBx, hc->xfer_buff, hc->pmaadress, (uint16_t)len);
USB_DRD_SET_CHEP_TX_CNT(USBx, phy_ch_num, (uint16_t)len);
/*SET PID SETUP */
if ((hc->data_pid) == HC_PID_SETUP)
{
USB_DRD_CHEP_TX_SETUP(USBx, phy_ch_num);
}
}
else if (hc->ep_type == EP_TYPE_BULK)
{
(void)USB_HC_BULK_DB_StartXfer(USBx, hc, ch_reg, &len);
}
else
{
(void)USB_HC_ISO_DB_StartXfer(USBx, hc, len);
}
/* Enable host channel */
USB_DRD_SET_CHEP_TX_STATUS(USBx, hc->phy_ch_num, USB_CH_TX_VALID);
}
return HAL_OK;
}
/**
* @brief Start Transfer of Channel isochronous out double buffer
* @param USBx Selected device
* @param hc_num Host Channel number
* This parameter can be a value from 1 to 15
* @param len Transfer Length
* @retval HAL state
*/
static HAL_StatusTypeDef USB_HC_ISO_DB_StartXfer(USB_DRD_TypeDef *USBx,
USB_DRD_HCTypeDef *hc,
uint32_t len)
{
uint32_t phy_ch_num = (uint32_t)hc->phy_ch_num;
/* check the DTOG_TX to determine in which buffer we should write */
if ((USB_DRD_GET_CHEP(USBx, phy_ch_num) & USB_CH_DTOG_TX) != 0U)
{
if (hc->pmabuff1_state == USB_PMABUF_EMPTY)
{
/* Set the Double buffer counter for pmabuffer1 */
USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, hc->ch_dir, len);
hc->pmabuff1_state = USB_PMABUF_NOT_EMPTY;
USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)len);
if (hc->pmabuff0_state == USB_PMABUF_EMPTY)
{
hc->urb_state = URB_DONE;
}
}
else if (hc->pmabuff0_state == USB_PMABUF_EMPTY)
{
/* Set the Double buffer counter for pmabuffer0 */
USB_DRD_SET_CHEP_DBUF0_CNT(USBx, phy_ch_num, hc->ch_dir, len);
USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)len);
hc->pmabuff0_state = USB_PMABUF_NOT_EMPTY;
}
else
{
/* both buffer are not empty, should not be in this condition */
/*...*/
}
}
else
{
/* DTOGTX=0 */
if (hc->pmabuff0_state == USB_PMABUF_EMPTY)
{
/* Set the Double buffer counter for pmabuffer0 */
USB_DRD_SET_CHEP_DBUF0_CNT(USBx, phy_ch_num, hc->ch_dir, len);
USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)len);
hc->pmabuff0_state = USB_PMABUF_NOT_EMPTY;
if (hc->pmabuff1_state == USB_PMABUF_EMPTY)
{
hc->urb_state = URB_DONE;
}
}
else if (hc->pmabuff1_state == USB_PMABUF_EMPTY)
{
/* Set the Double buffer counter for pmabuffer1 */
USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, hc->ch_dir, len);
hc->pmabuff1_state = USB_PMABUF_NOT_EMPTY;
USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)len);
}
else
{
/*...*/
}
}
return HAL_OK;
}
/**
* @brief Start Transfer of Channel bulk out double buffer
* @param USBx Selected device
* @param hc_num Host Channel number
* This parameter can be a value from 1 to 15
* @param ch_reg snapshot of the CHEPR register
* @param len Transfer Length
* @retval HAL state
*/
static HAL_StatusTypeDef USB_HC_BULK_DB_StartXfer(USB_DRD_TypeDef *USBx,
USB_DRD_HCTypeDef *hc,
uint32_t ch_reg,
uint32_t *len)
{
uint32_t phy_ch_num = (uint32_t)hc->phy_ch_num;
/* -Double Buffer Mangement- */
if (hc->xfer_len_db > hc->max_packet)
{
/* enable double buffer mode */
(void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_DBUFF_ENBALE);
*len = hc->max_packet;
hc->xfer_len_db -= *len;
/* Prepare two buffer before enabling host */
if ((ch_reg & USB_CH_DTOG_TX) == 0U)
{
/* Write Buffer0 */
USB_DRD_SET_CHEP_TX_CNT(USBx, phy_ch_num, (uint16_t)*len);
USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)*len);
}
else
{
/* Write Buffer1 */
USB_DRD_SET_CHEP_DBUF1_CNT(USBx, (uint8_t) phy_ch_num, 0U, (uint16_t)*len);
USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)*len);
}
hc->xfer_buff += *len;
/* Multi packet transfer */
if (hc->xfer_len_db > hc->max_packet)
{
*len = hc->max_packet;
hc->xfer_len_db -= *len;
}
else
{
*len = hc->xfer_len_db;
hc->xfer_len_db = 0U;
}
if ((ch_reg & USB_CH_DTOG_TX) == 0U)
{
/* Write Buffer1 */
USB_DRD_SET_CHEP_DBUF1_CNT(USBx, phy_ch_num, 0U, (uint16_t)*len);
USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr1, (uint16_t)*len);
}
else
{
/* Write Buffer0 */
USB_DRD_SET_CHEP_TX_CNT(USBx, phy_ch_num, (uint16_t)*len);
USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)*len);
}
}
else
{
/* Disable double buffer mode */
(void)USB_HC_DoubleBuffer(USBx, (uint8_t)phy_ch_num, USB_DRD_DBUFF_DISABLE);
USB_WritePMA(USBx, hc->xfer_buff, hc->pmaaddr0, (uint16_t)*len);
USB_DRD_SET_CHEP_TX_CNT(USBx, phy_ch_num, (uint16_t)*len);
}
return HAL_OK;
}
/**
* @brief Halt a host channel in
* @param USBx Selected device
* @param hc_num Host Channel number
* This parameter can be a value from 1 to 15
* @retval HAL state
*/
HAL_StatusTypeDef USB_HC_IN_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch)
{
/* Set disable to Channel */
USB_DRD_SET_CHEP_RX_STATUS(USBx, phy_ch, USB_CH_RX_DIS);
return HAL_OK;
}
/**
* @brief Halt a host channel out
* @param USBx Selected device
* @param hc_num Host Channel number
* This parameter can be a value from 1 to 15
* @retval HAL state
*/
HAL_StatusTypeDef USB_HC_OUT_Halt(USB_DRD_TypeDef *USBx, uint8_t phy_ch)
{
/* Set disable to Channel */
USB_DRD_SET_CHEP_TX_STATUS(USBx, phy_ch, USB_CH_TX_DIS);
return HAL_OK;
}
/**
* @brief Stop Host Core
* @param USBx Selected device
* @retval HAL state
*/
HAL_StatusTypeDef USB_StopHost(USB_DRD_TypeDef *USBx)
{
USBx->ISTR &= ~(USB_ISTR_DIR | USB_ISTR_L1REQ |
USB_ISTR_ESOF | USB_ISTR_SOF |
USB_ISTR_RESET | USB_ISTR_DCON |
USB_ISTR_SUSP | USB_ISTR_WKUP |
USB_ISTR_ERR | USB_ISTR_PMAOVR |
USB_ISTR_CTR);
/* Set PowerDown */
USBx->CNTR |= USB_CNTR_PDWN;
/* Force a Reset */
USBx->CNTR |= USB_CNTR_USBRST;
return HAL_OK;
}
/**
* @}
*/
/**
* @}
*/
#endif /* defined (USB_DRD_FS) */
#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in a new issue View git blame Copy permalink