6646 lines
221 KiB
C
6646 lines
221 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f0xx_hal_i2c.c
|
|
* @author MCD Application Team
|
|
* @brief I2C HAL module driver.
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the Inter Integrated Circuit (I2C) peripheral:
|
|
* + Initialization and de-initialization functions
|
|
* + IO operation functions
|
|
* + Peripheral State and Errors functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use this driver #####
|
|
==============================================================================
|
|
[..]
|
|
The I2C HAL driver can be used as follows:
|
|
|
|
(#) Declare a I2C_HandleTypeDef handle structure, for example:
|
|
I2C_HandleTypeDef hi2c;
|
|
|
|
(#)Initialize the I2C low level resources by implementing the @ref HAL_I2C_MspInit() API:
|
|
(##) Enable the I2Cx interface clock
|
|
(##) I2C pins configuration
|
|
(+++) Enable the clock for the I2C GPIOs
|
|
(+++) Configure I2C pins as alternate function open-drain
|
|
(##) NVIC configuration if you need to use interrupt process
|
|
(+++) Configure the I2Cx interrupt priority
|
|
(+++) Enable the NVIC I2C IRQ Channel
|
|
(##) DMA Configuration if you need to use DMA process
|
|
(+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive channel
|
|
(+++) Enable the DMAx interface clock using
|
|
(+++) Configure the DMA handle parameters
|
|
(+++) Configure the DMA Tx or Rx channel
|
|
(+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
|
|
(+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
|
|
the DMA Tx or Rx channel
|
|
|
|
(#) Configure the Communication Clock Timing, Own Address1, Master Addressing mode, Dual Addressing mode,
|
|
Own Address2, Own Address2 Mask, General call and Nostretch mode in the hi2c Init structure.
|
|
|
|
(#) Initialize the I2C registers by calling the @ref HAL_I2C_Init(), configures also the low level Hardware
|
|
(GPIO, CLOCK, NVIC...etc) by calling the customized @ref HAL_I2C_MspInit(&hi2c) API.
|
|
|
|
(#) To check if target device is ready for communication, use the function @ref HAL_I2C_IsDeviceReady()
|
|
|
|
(#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
|
|
|
|
*** Polling mode IO operation ***
|
|
=================================
|
|
[..]
|
|
(+) Transmit in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Transmit()
|
|
(+) Receive in master mode an amount of data in blocking mode using @ref HAL_I2C_Master_Receive()
|
|
(+) Transmit in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Transmit()
|
|
(+) Receive in slave mode an amount of data in blocking mode using @ref HAL_I2C_Slave_Receive()
|
|
|
|
*** Polling mode IO MEM operation ***
|
|
=====================================
|
|
[..]
|
|
(+) Write an amount of data in blocking mode to a specific memory address using @ref HAL_I2C_Mem_Write()
|
|
(+) Read an amount of data in blocking mode from a specific memory address using @ref HAL_I2C_Mem_Read()
|
|
|
|
|
|
*** Interrupt mode IO operation ***
|
|
===================================
|
|
[..]
|
|
(+) Transmit in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Transmit_IT()
|
|
(+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
|
|
(+) Receive in master mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Receive_IT()
|
|
(+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
|
|
(+) Transmit in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Transmit_IT()
|
|
(+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
|
|
(+) Receive in slave mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Receive_IT()
|
|
(+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
|
|
(+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
|
|
(+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT()
|
|
(+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
|
|
(+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro.
|
|
This action will inform Master to generate a Stop condition to discard the communication.
|
|
|
|
|
|
*** Interrupt mode or DMA mode IO sequential operation ***
|
|
==========================================================
|
|
[..]
|
|
(@) These interfaces allow to manage a sequential transfer with a repeated start condition
|
|
when a direction change during transfer
|
|
[..]
|
|
(+) A specific option field manage the different steps of a sequential transfer
|
|
(+) Option field values are defined through @ref I2C_XFEROPTIONS and are listed below:
|
|
(++) I2C_FIRST_AND_LAST_FRAME: No sequential usage, functional is same as associated interfaces in no sequential mode
|
|
(++) I2C_FIRST_FRAME: Sequential usage, this option allow to manage a sequence with start condition, address
|
|
and data to transfer without a final stop condition
|
|
(++) I2C_FIRST_AND_NEXT_FRAME: Sequential usage (Master only), this option allow to manage a sequence with start condition, address
|
|
and data to transfer without a final stop condition, an then permit a call the same master sequential interface
|
|
several times (like @ref HAL_I2C_Master_Seq_Transmit_IT() then @ref HAL_I2C_Master_Seq_Transmit_IT()
|
|
or @ref HAL_I2C_Master_Seq_Transmit_DMA() then @ref HAL_I2C_Master_Seq_Transmit_DMA())
|
|
(++) I2C_NEXT_FRAME: Sequential usage, this option allow to manage a sequence with a restart condition, address
|
|
and with new data to transfer if the direction change or manage only the new data to transfer
|
|
if no direction change and without a final stop condition in both cases
|
|
(++) I2C_LAST_FRAME: Sequential usage, this option allow to manage a sequance with a restart condition, address
|
|
and with new data to transfer if the direction change or manage only the new data to transfer
|
|
if no direction change and with a final stop condition in both cases
|
|
(++) I2C_LAST_FRAME_NO_STOP: Sequential usage (Master only), this option allow to manage a restart condition after several call of the same master sequential
|
|
interface several times (link with option I2C_FIRST_AND_NEXT_FRAME).
|
|
Usage can, transfer several bytes one by one using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
|
|
or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
|
|
or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME)
|
|
or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_AND_NEXT_FRAME then I2C_NEXT_FRAME).
|
|
Then usage of this option I2C_LAST_FRAME_NO_STOP at the last Transmit or Receive sequence permit to call the opposite interface Receive or Transmit
|
|
without stopping the communication and so generate a restart condition.
|
|
(++) I2C_OTHER_FRAME: Sequential usage (Master only), this option allow to manage a restart condition after each call of the same master sequential
|
|
interface.
|
|
Usage can, transfer several bytes one by one with a restart with slave address between each bytes using HAL_I2C_Master_Seq_Transmit_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME)
|
|
or HAL_I2C_Master_Seq_Receive_IT(option I2C_FIRST_FRAME then I2C_OTHER_FRAME)
|
|
or HAL_I2C_Master_Seq_Transmit_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME)
|
|
or HAL_I2C_Master_Seq_Receive_DMA(option I2C_FIRST_FRAME then I2C_OTHER_FRAME).
|
|
Then usage of this option I2C_OTHER_AND_LAST_FRAME at the last frame to help automatic generation of STOP condition.
|
|
|
|
(+) Different sequential I2C interfaces are listed below:
|
|
(++) Sequential transmit in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Transmit_IT()
|
|
or using @ref HAL_I2C_Master_Seq_Transmit_DMA()
|
|
(+++) At transmission end of current frame transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
|
|
(++) Sequential receive in master I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Master_Seq_Receive_IT()
|
|
or using @ref HAL_I2C_Master_Seq_Receive_DMA()
|
|
(+++) At reception end of current frame transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
|
|
(++) Abort a master IT or DMA I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT()
|
|
(+++) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
|
|
(++) Enable/disable the Address listen mode in slave I2C mode using @ref HAL_I2C_EnableListen_IT() @ref HAL_I2C_DisableListen_IT()
|
|
(+++) When address slave I2C match, @ref HAL_I2C_AddrCallback() is executed and user can
|
|
add his own code to check the Address Match Code and the transmission direction request by master (Write/Read).
|
|
(+++) At Listen mode end @ref HAL_I2C_ListenCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_ListenCpltCallback()
|
|
(++) Sequential transmit in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Transmit_IT()
|
|
or using @ref HAL_I2C_Slave_Seq_Transmit_DMA()
|
|
(+++) At transmission end of current frame transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
|
|
(++) Sequential receive in slave I2C mode an amount of data in non-blocking mode using @ref HAL_I2C_Slave_Seq_Receive_IT()
|
|
or using @ref HAL_I2C_Slave_Seq_Receive_DMA()
|
|
(+++) At reception end of current frame transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
|
|
(++) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
|
|
(++) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro.
|
|
This action will inform Master to generate a Stop condition to discard the communication.
|
|
|
|
*** Interrupt mode IO MEM operation ***
|
|
=======================================
|
|
[..]
|
|
(+) Write an amount of data in non-blocking mode with Interrupt to a specific memory address using
|
|
@ref HAL_I2C_Mem_Write_IT()
|
|
(+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback()
|
|
(+) Read an amount of data in non-blocking mode with Interrupt from a specific memory address using
|
|
@ref HAL_I2C_Mem_Read_IT()
|
|
(+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback()
|
|
(+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
|
|
|
|
*** DMA mode IO operation ***
|
|
==============================
|
|
[..]
|
|
(+) Transmit in master mode an amount of data in non-blocking mode (DMA) using
|
|
@ref HAL_I2C_Master_Transmit_DMA()
|
|
(+) At transmission end of transfer, @ref HAL_I2C_MasterTxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_MasterTxCpltCallback()
|
|
(+) Receive in master mode an amount of data in non-blocking mode (DMA) using
|
|
@ref HAL_I2C_Master_Receive_DMA()
|
|
(+) At reception end of transfer, @ref HAL_I2C_MasterRxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_MasterRxCpltCallback()
|
|
(+) Transmit in slave mode an amount of data in non-blocking mode (DMA) using
|
|
@ref HAL_I2C_Slave_Transmit_DMA()
|
|
(+) At transmission end of transfer, @ref HAL_I2C_SlaveTxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_SlaveTxCpltCallback()
|
|
(+) Receive in slave mode an amount of data in non-blocking mode (DMA) using
|
|
@ref HAL_I2C_Slave_Receive_DMA()
|
|
(+) At reception end of transfer, @ref HAL_I2C_SlaveRxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_SlaveRxCpltCallback()
|
|
(+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
|
|
(+) Abort a master I2C process communication with Interrupt using @ref HAL_I2C_Master_Abort_IT()
|
|
(+) End of abort process, @ref HAL_I2C_AbortCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_AbortCpltCallback()
|
|
(+) Discard a slave I2C process communication using @ref __HAL_I2C_GENERATE_NACK() macro.
|
|
This action will inform Master to generate a Stop condition to discard the communication.
|
|
|
|
*** DMA mode IO MEM operation ***
|
|
=================================
|
|
[..]
|
|
(+) Write an amount of data in non-blocking mode with DMA to a specific memory address using
|
|
@ref HAL_I2C_Mem_Write_DMA()
|
|
(+) At Memory end of write transfer, @ref HAL_I2C_MemTxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_MemTxCpltCallback()
|
|
(+) Read an amount of data in non-blocking mode with DMA from a specific memory address using
|
|
@ref HAL_I2C_Mem_Read_DMA()
|
|
(+) At Memory end of read transfer, @ref HAL_I2C_MemRxCpltCallback() is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_MemRxCpltCallback()
|
|
(+) In case of transfer Error, @ref HAL_I2C_ErrorCallback() function is executed and user can
|
|
add his own code by customization of function pointer @ref HAL_I2C_ErrorCallback()
|
|
|
|
|
|
*** I2C HAL driver macros list ***
|
|
==================================
|
|
[..]
|
|
Below the list of most used macros in I2C HAL driver.
|
|
|
|
(+) @ref __HAL_I2C_ENABLE: Enable the I2C peripheral
|
|
(+) @ref __HAL_I2C_DISABLE: Disable the I2C peripheral
|
|
(+) @ref __HAL_I2C_GENERATE_NACK: Generate a Non-Acknowledge I2C peripheral in Slave mode
|
|
(+) @ref __HAL_I2C_GET_FLAG: Check whether the specified I2C flag is set or not
|
|
(+) @ref __HAL_I2C_CLEAR_FLAG: Clear the specified I2C pending flag
|
|
(+) @ref __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
|
|
(+) @ref __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
|
|
|
|
*** Callback registration ***
|
|
=============================================
|
|
[..]
|
|
The compilation flag USE_HAL_I2C_REGISTER_CALLBACKS when set to 1
|
|
allows the user to configure dynamically the driver callbacks.
|
|
Use Functions @ref HAL_I2C_RegisterCallback() or @ref HAL_I2C_RegisterAddrCallback()
|
|
to register an interrupt callback.
|
|
[..]
|
|
Function @ref HAL_I2C_RegisterCallback() allows to register following callbacks:
|
|
(+) MasterTxCpltCallback : callback for Master transmission end of transfer.
|
|
(+) MasterRxCpltCallback : callback for Master reception end of transfer.
|
|
(+) SlaveTxCpltCallback : callback for Slave transmission end of transfer.
|
|
(+) SlaveRxCpltCallback : callback for Slave reception end of transfer.
|
|
(+) ListenCpltCallback : callback for end of listen mode.
|
|
(+) MemTxCpltCallback : callback for Memory transmission end of transfer.
|
|
(+) MemRxCpltCallback : callback for Memory reception end of transfer.
|
|
(+) ErrorCallback : callback for error detection.
|
|
(+) AbortCpltCallback : callback for abort completion process.
|
|
(+) MspInitCallback : callback for Msp Init.
|
|
(+) MspDeInitCallback : callback for Msp DeInit.
|
|
This function takes as parameters the HAL peripheral handle, the Callback ID
|
|
and a pointer to the user callback function.
|
|
[..]
|
|
For specific callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_RegisterAddrCallback().
|
|
[..]
|
|
Use function @ref HAL_I2C_UnRegisterCallback to reset a callback to the default
|
|
weak function.
|
|
@ref HAL_I2C_UnRegisterCallback takes as parameters the HAL peripheral handle,
|
|
and the Callback ID.
|
|
This function allows to reset following callbacks:
|
|
(+) MasterTxCpltCallback : callback for Master transmission end of transfer.
|
|
(+) MasterRxCpltCallback : callback for Master reception end of transfer.
|
|
(+) SlaveTxCpltCallback : callback for Slave transmission end of transfer.
|
|
(+) SlaveRxCpltCallback : callback for Slave reception end of transfer.
|
|
(+) ListenCpltCallback : callback for end of listen mode.
|
|
(+) MemTxCpltCallback : callback for Memory transmission end of transfer.
|
|
(+) MemRxCpltCallback : callback for Memory reception end of transfer.
|
|
(+) ErrorCallback : callback for error detection.
|
|
(+) AbortCpltCallback : callback for abort completion process.
|
|
(+) MspInitCallback : callback for Msp Init.
|
|
(+) MspDeInitCallback : callback for Msp DeInit.
|
|
[..]
|
|
For callback AddrCallback use dedicated register callbacks : @ref HAL_I2C_UnRegisterAddrCallback().
|
|
[..]
|
|
By default, after the @ref HAL_I2C_Init() and when the state is @ref HAL_I2C_STATE_RESET
|
|
all callbacks are set to the corresponding weak functions:
|
|
examples @ref HAL_I2C_MasterTxCpltCallback(), @ref HAL_I2C_MasterRxCpltCallback().
|
|
Exception done for MspInit and MspDeInit functions that are
|
|
reset to the legacy weak functions in the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit() only when
|
|
these callbacks are null (not registered beforehand).
|
|
If MspInit or MspDeInit are not null, the @ref HAL_I2C_Init()/ @ref HAL_I2C_DeInit()
|
|
keep and use the user MspInit/MspDeInit callbacks (registered beforehand) whatever the state.
|
|
[..]
|
|
Callbacks can be registered/unregistered in @ref HAL_I2C_STATE_READY state only.
|
|
Exception done MspInit/MspDeInit functions that can be registered/unregistered
|
|
in @ref HAL_I2C_STATE_READY or @ref HAL_I2C_STATE_RESET state,
|
|
thus registered (user) MspInit/DeInit callbacks can be used during the Init/DeInit.
|
|
Then, the user first registers the MspInit/MspDeInit user callbacks
|
|
using @ref HAL_I2C_RegisterCallback() before calling @ref HAL_I2C_DeInit()
|
|
or @ref HAL_I2C_Init() function.
|
|
[..]
|
|
When the compilation flag USE_HAL_I2C_REGISTER_CALLBACKS is set to 0 or
|
|
not defined, the callback registration feature is not available and all callbacks
|
|
are set to the corresponding weak functions.
|
|
|
|
[..]
|
|
(@) You can refer to the I2C HAL driver header file for more useful macros
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2016 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f0xx_hal.h"
|
|
|
|
/** @addtogroup STM32F0xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup I2C I2C
|
|
* @brief I2C HAL module driver
|
|
* @{
|
|
*/
|
|
|
|
#ifdef HAL_I2C_MODULE_ENABLED
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
|
|
/** @defgroup I2C_Private_Define I2C Private Define
|
|
* @{
|
|
*/
|
|
#define TIMING_CLEAR_MASK (0xF0FFFFFFU) /*!< I2C TIMING clear register Mask */
|
|
#define I2C_TIMEOUT_ADDR (10000U) /*!< 10 s */
|
|
#define I2C_TIMEOUT_BUSY (25U) /*!< 25 ms */
|
|
#define I2C_TIMEOUT_DIR (25U) /*!< 25 ms */
|
|
#define I2C_TIMEOUT_RXNE (25U) /*!< 25 ms */
|
|
#define I2C_TIMEOUT_STOPF (25U) /*!< 25 ms */
|
|
#define I2C_TIMEOUT_TC (25U) /*!< 25 ms */
|
|
#define I2C_TIMEOUT_TCR (25U) /*!< 25 ms */
|
|
#define I2C_TIMEOUT_TXIS (25U) /*!< 25 ms */
|
|
#define I2C_TIMEOUT_FLAG (25U) /*!< 25 ms */
|
|
|
|
#define MAX_NBYTE_SIZE 255U
|
|
#define SlaveAddr_SHIFT 7U
|
|
#define SlaveAddr_MSK 0x06U
|
|
|
|
/* Private define for @ref PreviousState usage */
|
|
#define I2C_STATE_MSK ((uint32_t)((uint32_t)((uint32_t)HAL_I2C_STATE_BUSY_TX | (uint32_t)HAL_I2C_STATE_BUSY_RX) & (uint32_t)(~((uint32_t)HAL_I2C_STATE_READY)))) /*!< Mask State define, keep only RX and TX bits */
|
|
#define I2C_STATE_NONE ((uint32_t)(HAL_I2C_MODE_NONE)) /*!< Default Value */
|
|
#define I2C_STATE_MASTER_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy TX, combinaison of State LSB and Mode enum */
|
|
#define I2C_STATE_MASTER_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MASTER)) /*!< Master Busy RX, combinaison of State LSB and Mode enum */
|
|
#define I2C_STATE_SLAVE_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy TX, combinaison of State LSB and Mode enum */
|
|
#define I2C_STATE_SLAVE_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_SLAVE)) /*!< Slave Busy RX, combinaison of State LSB and Mode enum */
|
|
#define I2C_STATE_MEM_BUSY_TX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_TX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy TX, combinaison of State LSB and Mode enum */
|
|
#define I2C_STATE_MEM_BUSY_RX ((uint32_t)(((uint32_t)HAL_I2C_STATE_BUSY_RX & I2C_STATE_MSK) | (uint32_t)HAL_I2C_MODE_MEM)) /*!< Memory Busy RX, combinaison of State LSB and Mode enum */
|
|
|
|
|
|
/* Private define to centralize the enable/disable of Interrupts */
|
|
#define I2C_XFER_TX_IT (uint16_t)(0x0001U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */
|
|
#define I2C_XFER_RX_IT (uint16_t)(0x0002U) /* Bit field can be combinated with @ref I2C_XFER_LISTEN_IT */
|
|
#define I2C_XFER_LISTEN_IT (uint16_t)(0x8000U) /* Bit field can be combinated with @ref I2C_XFER_TX_IT and @ref I2C_XFER_RX_IT */
|
|
|
|
#define I2C_XFER_ERROR_IT (uint16_t)(0x0010U) /* Bit definition to manage addition of global Error and NACK treatment */
|
|
#define I2C_XFER_CPLT_IT (uint16_t)(0x0020U) /* Bit definition to manage only STOP evenement */
|
|
#define I2C_XFER_RELOAD_IT (uint16_t)(0x0040U) /* Bit definition to manage only Reload of NBYTE */
|
|
|
|
/* Private define Sequential Transfer Options default/reset value */
|
|
#define I2C_NO_OPTION_FRAME (0xFFFF0000U)
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
|
|
/** @defgroup I2C_Private_Functions I2C Private Functions
|
|
* @{
|
|
*/
|
|
/* Private functions to handle DMA transfer */
|
|
static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
|
|
static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
|
|
static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
|
|
static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
|
|
static void I2C_DMAError(DMA_HandleTypeDef *hdma);
|
|
static void I2C_DMAAbort(DMA_HandleTypeDef *hdma);
|
|
|
|
/* Private functions to handle IT transfer */
|
|
static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
|
|
static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c);
|
|
static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c);
|
|
static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
|
|
static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
|
|
static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags);
|
|
static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode);
|
|
|
|
/* Private functions to handle IT transfer */
|
|
static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
|
|
static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart);
|
|
|
|
/* Private functions for I2C transfer IRQ handler */
|
|
static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
|
|
static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
|
|
static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
|
|
static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources);
|
|
|
|
/* Private functions to handle flags during polling transfer */
|
|
static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status,
|
|
uint32_t Timeout, uint32_t Tickstart);
|
|
static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
|
|
static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
|
|
static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
|
|
static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart);
|
|
|
|
/* Private functions to centralize the enable/disable of Interrupts */
|
|
static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
|
|
static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest);
|
|
|
|
/* Private function to treat different error callback */
|
|
static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c);
|
|
|
|
/* Private function to flush TXDR register */
|
|
static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c);
|
|
|
|
/* Private function to handle start, restart or stop a transfer */
|
|
static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode,
|
|
uint32_t Request);
|
|
|
|
/* Private function to Convert Specific options */
|
|
static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c);
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @defgroup I2C_Exported_Functions I2C Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Initialization and de-initialization functions #####
|
|
===============================================================================
|
|
[..] This subsection provides a set of functions allowing to initialize and
|
|
deinitialize the I2Cx peripheral:
|
|
|
|
(+) User must Implement HAL_I2C_MspInit() function in which he configures
|
|
all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
|
|
|
|
(+) Call the function HAL_I2C_Init() to configure the selected device with
|
|
the selected configuration:
|
|
(++) Clock Timing
|
|
(++) Own Address 1
|
|
(++) Addressing mode (Master, Slave)
|
|
(++) Dual Addressing mode
|
|
(++) Own Address 2
|
|
(++) Own Address 2 Mask
|
|
(++) General call mode
|
|
(++) Nostretch mode
|
|
|
|
(+) Call the function HAL_I2C_DeInit() to restore the default configuration
|
|
of the selected I2Cx peripheral.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initializes the I2C according to the specified parameters
|
|
* in the I2C_InitTypeDef and initialize the associated handle.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Check the I2C handle allocation */
|
|
if (hi2c == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
|
|
assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
|
|
assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
|
|
assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
|
|
assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
|
|
assert_param(IS_I2C_OWN_ADDRESS2_MASK(hi2c->Init.OwnAddress2Masks));
|
|
assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
|
|
assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_RESET)
|
|
{
|
|
/* Allocate lock resource and initialize it */
|
|
hi2c->Lock = HAL_UNLOCKED;
|
|
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
/* Init the I2C Callback settings */
|
|
hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */
|
|
hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */
|
|
hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */
|
|
hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */
|
|
hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */
|
|
hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */
|
|
hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */
|
|
hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */
|
|
hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
|
|
hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */
|
|
|
|
if (hi2c->MspInitCallback == NULL)
|
|
{
|
|
hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */
|
|
}
|
|
|
|
/* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
|
|
hi2c->MspInitCallback(hi2c);
|
|
#else
|
|
/* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
|
|
HAL_I2C_MspInit(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY;
|
|
|
|
/* Disable the selected I2C peripheral */
|
|
__HAL_I2C_DISABLE(hi2c);
|
|
|
|
/*---------------------------- I2Cx TIMINGR Configuration ------------------*/
|
|
/* Configure I2Cx: Frequency range */
|
|
hi2c->Instance->TIMINGR = hi2c->Init.Timing & TIMING_CLEAR_MASK;
|
|
|
|
/*---------------------------- I2Cx OAR1 Configuration ---------------------*/
|
|
/* Disable Own Address1 before set the Own Address1 configuration */
|
|
hi2c->Instance->OAR1 &= ~I2C_OAR1_OA1EN;
|
|
|
|
/* Configure I2Cx: Own Address1 and ack own address1 mode */
|
|
if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
|
|
{
|
|
hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | hi2c->Init.OwnAddress1);
|
|
}
|
|
else /* I2C_ADDRESSINGMODE_10BIT */
|
|
{
|
|
hi2c->Instance->OAR1 = (I2C_OAR1_OA1EN | I2C_OAR1_OA1MODE | hi2c->Init.OwnAddress1);
|
|
}
|
|
|
|
/*---------------------------- I2Cx CR2 Configuration ----------------------*/
|
|
/* Configure I2Cx: Addressing Master mode */
|
|
if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
|
|
{
|
|
hi2c->Instance->CR2 = (I2C_CR2_ADD10);
|
|
}
|
|
/* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
|
|
hi2c->Instance->CR2 |= (I2C_CR2_AUTOEND | I2C_CR2_NACK);
|
|
|
|
/*---------------------------- I2Cx OAR2 Configuration ---------------------*/
|
|
/* Disable Own Address2 before set the Own Address2 configuration */
|
|
hi2c->Instance->OAR2 &= ~I2C_DUALADDRESS_ENABLE;
|
|
|
|
/* Configure I2Cx: Dual mode and Own Address2 */
|
|
hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2 | (hi2c->Init.OwnAddress2Masks << 8));
|
|
|
|
/*---------------------------- I2Cx CR1 Configuration ----------------------*/
|
|
/* Configure I2Cx: Generalcall and NoStretch mode */
|
|
hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
|
|
|
|
/* Enable the selected I2C peripheral */
|
|
__HAL_I2C_ENABLE(hi2c);
|
|
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->PreviousState = I2C_STATE_NONE;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitialize the I2C peripheral.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Check the I2C handle allocation */
|
|
if (hi2c == NULL)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY;
|
|
|
|
/* Disable the I2C Peripheral Clock */
|
|
__HAL_I2C_DISABLE(hi2c);
|
|
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
if (hi2c->MspDeInitCallback == NULL)
|
|
{
|
|
hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */
|
|
}
|
|
|
|
/* DeInit the low level hardware: GPIO, CLOCK, NVIC */
|
|
hi2c->MspDeInitCallback(hi2c);
|
|
#else
|
|
/* DeInit the low level hardware: GPIO, CLOCK, NVIC */
|
|
HAL_I2C_MspDeInit(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
hi2c->State = HAL_I2C_STATE_RESET;
|
|
hi2c->PreviousState = I2C_STATE_NONE;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initialize the I2C MSP.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_MspInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitialize the I2C MSP.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_MspDeInit could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
/**
|
|
* @brief Register a User I2C Callback
|
|
* To be used instead of the weak predefined callback
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param CallbackID ID of the callback to be registered
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID
|
|
* @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID
|
|
* @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID
|
|
* @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID
|
|
* @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID
|
|
* @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID
|
|
* @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID
|
|
* @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID
|
|
* @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID
|
|
* @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID
|
|
* @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID
|
|
* @param pCallback pointer to the Callback function
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_RegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID,
|
|
pI2C_CallbackTypeDef pCallback)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
if (pCallback == NULL)
|
|
{
|
|
/* Update the error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
if (HAL_I2C_STATE_READY == hi2c->State)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_I2C_MASTER_TX_COMPLETE_CB_ID :
|
|
hi2c->MasterTxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_MASTER_RX_COMPLETE_CB_ID :
|
|
hi2c->MasterRxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID :
|
|
hi2c->SlaveTxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID :
|
|
hi2c->SlaveRxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_LISTEN_COMPLETE_CB_ID :
|
|
hi2c->ListenCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_MEM_TX_COMPLETE_CB_ID :
|
|
hi2c->MemTxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_MEM_RX_COMPLETE_CB_ID :
|
|
hi2c->MemRxCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_ERROR_CB_ID :
|
|
hi2c->ErrorCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_ABORT_CB_ID :
|
|
hi2c->AbortCpltCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_MSPINIT_CB_ID :
|
|
hi2c->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_MSPDEINIT_CB_ID :
|
|
hi2c->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if (HAL_I2C_STATE_RESET == hi2c->State)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_I2C_MSPINIT_CB_ID :
|
|
hi2c->MspInitCallback = pCallback;
|
|
break;
|
|
|
|
case HAL_I2C_MSPDEINIT_CB_ID :
|
|
hi2c->MspDeInitCallback = pCallback;
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hi2c);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Unregister an I2C Callback
|
|
* I2C callback is redirected to the weak predefined callback
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param CallbackID ID of the callback to be unregistered
|
|
* This parameter can be one of the following values:
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref HAL_I2C_MASTER_TX_COMPLETE_CB_ID Master Tx Transfer completed callback ID
|
|
* @arg @ref HAL_I2C_MASTER_RX_COMPLETE_CB_ID Master Rx Transfer completed callback ID
|
|
* @arg @ref HAL_I2C_SLAVE_TX_COMPLETE_CB_ID Slave Tx Transfer completed callback ID
|
|
* @arg @ref HAL_I2C_SLAVE_RX_COMPLETE_CB_ID Slave Rx Transfer completed callback ID
|
|
* @arg @ref HAL_I2C_LISTEN_COMPLETE_CB_ID Listen Complete callback ID
|
|
* @arg @ref HAL_I2C_MEM_TX_COMPLETE_CB_ID Memory Tx Transfer callback ID
|
|
* @arg @ref HAL_I2C_MEM_RX_COMPLETE_CB_ID Memory Rx Transfer completed callback ID
|
|
* @arg @ref HAL_I2C_ERROR_CB_ID Error callback ID
|
|
* @arg @ref HAL_I2C_ABORT_CB_ID Abort callback ID
|
|
* @arg @ref HAL_I2C_MSPINIT_CB_ID MspInit callback ID
|
|
* @arg @ref HAL_I2C_MSPDEINIT_CB_ID MspDeInit callback ID
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_UnRegisterCallback(I2C_HandleTypeDef *hi2c, HAL_I2C_CallbackIDTypeDef CallbackID)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
if (HAL_I2C_STATE_READY == hi2c->State)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_I2C_MASTER_TX_COMPLETE_CB_ID :
|
|
hi2c->MasterTxCpltCallback = HAL_I2C_MasterTxCpltCallback; /* Legacy weak MasterTxCpltCallback */
|
|
break;
|
|
|
|
case HAL_I2C_MASTER_RX_COMPLETE_CB_ID :
|
|
hi2c->MasterRxCpltCallback = HAL_I2C_MasterRxCpltCallback; /* Legacy weak MasterRxCpltCallback */
|
|
break;
|
|
|
|
case HAL_I2C_SLAVE_TX_COMPLETE_CB_ID :
|
|
hi2c->SlaveTxCpltCallback = HAL_I2C_SlaveTxCpltCallback; /* Legacy weak SlaveTxCpltCallback */
|
|
break;
|
|
|
|
case HAL_I2C_SLAVE_RX_COMPLETE_CB_ID :
|
|
hi2c->SlaveRxCpltCallback = HAL_I2C_SlaveRxCpltCallback; /* Legacy weak SlaveRxCpltCallback */
|
|
break;
|
|
|
|
case HAL_I2C_LISTEN_COMPLETE_CB_ID :
|
|
hi2c->ListenCpltCallback = HAL_I2C_ListenCpltCallback; /* Legacy weak ListenCpltCallback */
|
|
break;
|
|
|
|
case HAL_I2C_MEM_TX_COMPLETE_CB_ID :
|
|
hi2c->MemTxCpltCallback = HAL_I2C_MemTxCpltCallback; /* Legacy weak MemTxCpltCallback */
|
|
break;
|
|
|
|
case HAL_I2C_MEM_RX_COMPLETE_CB_ID :
|
|
hi2c->MemRxCpltCallback = HAL_I2C_MemRxCpltCallback; /* Legacy weak MemRxCpltCallback */
|
|
break;
|
|
|
|
case HAL_I2C_ERROR_CB_ID :
|
|
hi2c->ErrorCallback = HAL_I2C_ErrorCallback; /* Legacy weak ErrorCallback */
|
|
break;
|
|
|
|
case HAL_I2C_ABORT_CB_ID :
|
|
hi2c->AbortCpltCallback = HAL_I2C_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
|
|
break;
|
|
|
|
case HAL_I2C_MSPINIT_CB_ID :
|
|
hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */
|
|
break;
|
|
|
|
case HAL_I2C_MSPDEINIT_CB_ID :
|
|
hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else if (HAL_I2C_STATE_RESET == hi2c->State)
|
|
{
|
|
switch (CallbackID)
|
|
{
|
|
case HAL_I2C_MSPINIT_CB_ID :
|
|
hi2c->MspInitCallback = HAL_I2C_MspInit; /* Legacy weak MspInit */
|
|
break;
|
|
|
|
case HAL_I2C_MSPDEINIT_CB_ID :
|
|
hi2c->MspDeInitCallback = HAL_I2C_MspDeInit; /* Legacy weak MspDeInit */
|
|
break;
|
|
|
|
default :
|
|
/* Update the error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
break;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hi2c);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief Register the Slave Address Match I2C Callback
|
|
* To be used instead of the weak HAL_I2C_AddrCallback() predefined callback
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pCallback pointer to the Address Match Callback function
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_RegisterAddrCallback(I2C_HandleTypeDef *hi2c, pI2C_AddrCallbackTypeDef pCallback)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
if (pCallback == NULL)
|
|
{
|
|
/* Update the error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
if (HAL_I2C_STATE_READY == hi2c->State)
|
|
{
|
|
hi2c->AddrCallback = pCallback;
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hi2c);
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* @brief UnRegister the Slave Address Match I2C Callback
|
|
* Info Ready I2C Callback is redirected to the weak HAL_I2C_AddrCallback() predefined callback
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_UnRegisterAddrCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
HAL_StatusTypeDef status = HAL_OK;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
if (HAL_I2C_STATE_READY == hi2c->State)
|
|
{
|
|
hi2c->AddrCallback = HAL_I2C_AddrCallback; /* Legacy weak AddrCallback */
|
|
}
|
|
else
|
|
{
|
|
/* Update the error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_INVALID_CALLBACK;
|
|
|
|
/* Return error status */
|
|
status = HAL_ERROR;
|
|
}
|
|
|
|
/* Release Lock */
|
|
__HAL_UNLOCK(hi2c);
|
|
return status;
|
|
}
|
|
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_Exported_Functions_Group2 Input and Output operation functions
|
|
* @brief Data transfers functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### IO operation functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to manage the I2C data
|
|
transfers.
|
|
|
|
(#) There are two modes of transfer:
|
|
(++) Blocking mode : The communication is performed in the polling mode.
|
|
The status of all data processing is returned by the same function
|
|
after finishing transfer.
|
|
(++) No-Blocking mode : The communication is performed using Interrupts
|
|
or DMA. These functions return the status of the transfer startup.
|
|
The end of the data processing will be indicated through the
|
|
dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
|
|
using DMA mode.
|
|
|
|
(#) Blocking mode functions are :
|
|
(++) HAL_I2C_Master_Transmit()
|
|
(++) HAL_I2C_Master_Receive()
|
|
(++) HAL_I2C_Slave_Transmit()
|
|
(++) HAL_I2C_Slave_Receive()
|
|
(++) HAL_I2C_Mem_Write()
|
|
(++) HAL_I2C_Mem_Read()
|
|
(++) HAL_I2C_IsDeviceReady()
|
|
|
|
(#) No-Blocking mode functions with Interrupt are :
|
|
(++) HAL_I2C_Master_Transmit_IT()
|
|
(++) HAL_I2C_Master_Receive_IT()
|
|
(++) HAL_I2C_Slave_Transmit_IT()
|
|
(++) HAL_I2C_Slave_Receive_IT()
|
|
(++) HAL_I2C_Mem_Write_IT()
|
|
(++) HAL_I2C_Mem_Read_IT()
|
|
(++) HAL_I2C_Master_Seq_Transmit_IT()
|
|
(++) HAL_I2C_Master_Seq_Receive_IT()
|
|
(++) HAL_I2C_Slave_Seq_Transmit_IT()
|
|
(++) HAL_I2C_Slave_Seq_Receive_IT()
|
|
(++) HAL_I2C_EnableListen_IT()
|
|
(++) HAL_I2C_DisableListen_IT()
|
|
(++) HAL_I2C_Master_Abort_IT()
|
|
|
|
(#) No-Blocking mode functions with DMA are :
|
|
(++) HAL_I2C_Master_Transmit_DMA()
|
|
(++) HAL_I2C_Master_Receive_DMA()
|
|
(++) HAL_I2C_Slave_Transmit_DMA()
|
|
(++) HAL_I2C_Slave_Receive_DMA()
|
|
(++) HAL_I2C_Mem_Write_DMA()
|
|
(++) HAL_I2C_Mem_Read_DMA()
|
|
(++) HAL_I2C_Master_Seq_Transmit_DMA()
|
|
(++) HAL_I2C_Master_Seq_Receive_DMA()
|
|
(++) HAL_I2C_Slave_Seq_Transmit_DMA()
|
|
(++) HAL_I2C_Slave_Seq_Receive_DMA()
|
|
|
|
(#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
|
|
(++) HAL_I2C_MasterTxCpltCallback()
|
|
(++) HAL_I2C_MasterRxCpltCallback()
|
|
(++) HAL_I2C_SlaveTxCpltCallback()
|
|
(++) HAL_I2C_SlaveRxCpltCallback()
|
|
(++) HAL_I2C_MemTxCpltCallback()
|
|
(++) HAL_I2C_MemRxCpltCallback()
|
|
(++) HAL_I2C_AddrCallback()
|
|
(++) HAL_I2C_ListenCpltCallback()
|
|
(++) HAL_I2C_ErrorCallback()
|
|
(++) HAL_I2C_AbortCpltCallback()
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Transmits in master mode an amount of data in blocking mode.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param Timeout Timeout duration
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size,
|
|
uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Init tickstart for timeout management*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_MASTER;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferISR = NULL;
|
|
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
|
|
}
|
|
|
|
while (hi2c->XferCount > 0U)
|
|
{
|
|
/* Wait until TXIS flag is set */
|
|
if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
/* Write data to TXDR */
|
|
hi2c->Instance->TXDR = *hi2c->pBuffPtr;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferCount--;
|
|
hi2c->XferSize--;
|
|
|
|
if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
|
|
{
|
|
/* Wait until TCR flag is set */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
|
|
/* Wait until STOPF flag is set */
|
|
if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear STOP Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Clear Configuration Register 2 */
|
|
I2C_RESET_CR2(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receives in master mode an amount of data in blocking mode.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param Timeout Timeout duration
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size,
|
|
uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Init tickstart for timeout management*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_MASTER;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferISR = NULL;
|
|
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
|
|
}
|
|
|
|
while (hi2c->XferCount > 0U)
|
|
{
|
|
/* Wait until RXNE flag is set */
|
|
if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Read data from RXDR */
|
|
*hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferSize--;
|
|
hi2c->XferCount--;
|
|
|
|
if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
|
|
{
|
|
/* Wait until TCR flag is set */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
|
|
/* Wait until STOPF flag is set */
|
|
if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear STOP Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Clear Configuration Register 2 */
|
|
I2C_RESET_CR2(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Transmits in slave mode an amount of data in blocking mode.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param Timeout Timeout duration
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Init tickstart for timeout management*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_SLAVE;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferISR = NULL;
|
|
|
|
/* Enable Address Acknowledge */
|
|
hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
|
|
|
|
/* Wait until ADDR flag is set */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear ADDR flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
|
|
|
|
/* If 10bit addressing mode is selected */
|
|
if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
|
|
{
|
|
/* Wait until ADDR flag is set */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear ADDR flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
|
|
}
|
|
|
|
/* Wait until DIR flag is set Transmitter mode */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
while (hi2c->XferCount > 0U)
|
|
{
|
|
/* Wait until TXIS flag is set */
|
|
if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Write data to TXDR */
|
|
hi2c->Instance->TXDR = *hi2c->pBuffPtr;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferCount--;
|
|
}
|
|
|
|
/* Wait until STOP flag is set */
|
|
if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
|
|
if (hi2c->ErrorCode == HAL_I2C_ERROR_AF)
|
|
{
|
|
/* Normal use case for Transmitter mode */
|
|
/* A NACK is generated to confirm the end of transfer */
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
}
|
|
else
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/* Clear STOP flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Wait until BUSY flag is reset */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive in slave mode an amount of data in blocking mode
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param Timeout Timeout duration
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Init tickstart for timeout management*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_SLAVE;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferISR = NULL;
|
|
|
|
/* Enable Address Acknowledge */
|
|
hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
|
|
|
|
/* Wait until ADDR flag is set */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear ADDR flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
|
|
|
|
/* Wait until DIR flag is reset Receiver mode */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_DIR, SET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
while (hi2c->XferCount > 0U)
|
|
{
|
|
/* Wait until RXNE flag is set */
|
|
if (I2C_WaitOnRXNEFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
|
|
/* Store Last receive data if any */
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET)
|
|
{
|
|
/* Read data from RXDR */
|
|
*hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferCount--;
|
|
}
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Read data from RXDR */
|
|
*hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferCount--;
|
|
}
|
|
|
|
/* Wait until STOP flag is set */
|
|
if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear STOP flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Wait until BUSY flag is reset */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Transmit in master mode an amount of data in non-blocking mode with Interrupt
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
uint16_t Size)
|
|
{
|
|
uint32_t xfermode;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_MASTER;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Master_ISR_IT;
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = I2C_AUTOEND_MODE;
|
|
}
|
|
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
|
|
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
|
|
/* possible to enable all of these */
|
|
/* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive in master mode an amount of data in non-blocking mode with Interrupt
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
|
|
{
|
|
uint32_t xfermode;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_MASTER;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Master_ISR_IT;
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = I2C_AUTOEND_MODE;
|
|
}
|
|
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
|
|
/* Enable ERR, TC, STOP, NACK, RXI interrupt */
|
|
/* possible to enable all of these */
|
|
/* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Transmit in slave mode an amount of data in non-blocking mode with Interrupt
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
|
|
{
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_SLAVE;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Enable Address Acknowledge */
|
|
hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Slave_ISR_IT;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
|
|
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
|
|
/* possible to enable all of these */
|
|
/* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive in slave mode an amount of data in non-blocking mode with Interrupt
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
|
|
{
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_SLAVE;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Enable Address Acknowledge */
|
|
hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Slave_ISR_IT;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
|
|
/* Enable ERR, TC, STOP, NACK, RXI interrupt */
|
|
/* possible to enable all of these */
|
|
/* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Transmit in master mode an amount of data in non-blocking mode with DMA
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
uint16_t Size)
|
|
{
|
|
uint32_t xfermode;
|
|
HAL_StatusTypeDef dmaxferstatus;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_MASTER;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Master_ISR_DMA;
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = I2C_AUTOEND_MODE;
|
|
}
|
|
|
|
if (hi2c->XferSize > 0U)
|
|
{
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
/* Set the I2C DMA transfer complete callback */
|
|
hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
|
|
|
|
/* Set the unused DMA callbacks to NULL */
|
|
hi2c->hdmatx->XferHalfCpltCallback = NULL;
|
|
hi2c->hdmatx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (dmaxferstatus == HAL_OK)
|
|
{
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_WRITE);
|
|
|
|
/* Update XferCount value */
|
|
hi2c->XferCount -= hi2c->XferSize;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR and NACK interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
|
|
|
|
/* Enable DMA Request */
|
|
hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update Transfer ISR function pointer */
|
|
hi2c->XferISR = I2C_Master_ISR_IT;
|
|
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to write and generate START condition */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
|
|
/* possible to enable all of these */
|
|
/* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive in master mode an amount of data in non-blocking mode with DMA
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
uint16_t Size)
|
|
{
|
|
uint32_t xfermode;
|
|
HAL_StatusTypeDef dmaxferstatus;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_MASTER;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Master_ISR_DMA;
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = I2C_AUTOEND_MODE;
|
|
}
|
|
|
|
if (hi2c->XferSize > 0U)
|
|
{
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
/* Set the I2C DMA transfer complete callback */
|
|
hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
|
|
|
|
/* Set the unused DMA callbacks to NULL */
|
|
hi2c->hdmarx->XferHalfCpltCallback = NULL;
|
|
hi2c->hdmarx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (dmaxferstatus == HAL_OK)
|
|
{
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to read and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
|
|
|
|
/* Update XferCount value */
|
|
hi2c->XferCount -= hi2c->XferSize;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR and NACK interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
|
|
|
|
/* Enable DMA Request */
|
|
hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update Transfer ISR function pointer */
|
|
hi2c->XferISR = I2C_Master_ISR_IT;
|
|
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to read and generate START condition */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
|
|
/* possible to enable all of these */
|
|
/* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Transmit in slave mode an amount of data in non-blocking mode with DMA
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
|
|
{
|
|
HAL_StatusTypeDef dmaxferstatus;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_SLAVE;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Slave_ISR_DMA;
|
|
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
/* Set the I2C DMA transfer complete callback */
|
|
hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
|
|
|
|
/* Set the unused DMA callbacks to NULL */
|
|
hi2c->hdmatx->XferHalfCpltCallback = NULL;
|
|
hi2c->hdmatx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (dmaxferstatus == HAL_OK)
|
|
{
|
|
/* Enable Address Acknowledge */
|
|
hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR, STOP, NACK, ADDR interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
|
|
|
|
/* Enable DMA Request */
|
|
hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Receive in slave mode an amount of data in non-blocking mode with DMA
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
|
|
{
|
|
HAL_StatusTypeDef dmaxferstatus;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_SLAVE;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Slave_ISR_DMA;
|
|
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
/* Set the I2C DMA transfer complete callback */
|
|
hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
|
|
|
|
/* Set the unused DMA callbacks to NULL */
|
|
hi2c->hdmarx->XferHalfCpltCallback = NULL;
|
|
hi2c->hdmarx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (dmaxferstatus == HAL_OK)
|
|
{
|
|
/* Enable Address Acknowledge */
|
|
hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR, STOP, NACK, ADDR interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
|
|
|
|
/* Enable DMA Request */
|
|
hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
/**
|
|
* @brief Write an amount of data in blocking mode to a specific memory address
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param MemAddress Internal memory address
|
|
* @param MemAddSize Size of internal memory address
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param Timeout Timeout duration
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Init tickstart for timeout management*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_MEM;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferISR = NULL;
|
|
|
|
/* Send Slave Address and Memory Address */
|
|
if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
|
|
do
|
|
{
|
|
/* Wait until TXIS flag is set */
|
|
if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Write data to TXDR */
|
|
hi2c->Instance->TXDR = *hi2c->pBuffPtr;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferCount--;
|
|
hi2c->XferSize--;
|
|
|
|
if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
|
|
{
|
|
/* Wait until TCR flag is set */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
}
|
|
|
|
} while (hi2c->XferCount > 0U);
|
|
|
|
/* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
|
|
/* Wait until STOPF flag is reset */
|
|
if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear STOP Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Clear Configuration Register 2 */
|
|
I2C_RESET_CR2(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Read an amount of data in blocking mode from a specific memory address
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param MemAddress Internal memory address
|
|
* @param MemAddSize Size of internal memory address
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param Timeout Timeout duration
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Init tickstart for timeout management*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_MEM;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferISR = NULL;
|
|
|
|
/* Send Slave Address and Memory Address */
|
|
if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_GENERATE_START_READ);
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
|
|
}
|
|
|
|
do
|
|
{
|
|
/* Wait until RXNE flag is set */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Read data from RXDR */
|
|
*hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferSize--;
|
|
hi2c->XferCount--;
|
|
|
|
if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
|
|
{
|
|
/* Wait until TCR flag is set */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t) hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
}
|
|
} while (hi2c->XferCount > 0U);
|
|
|
|
/* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
|
|
/* Wait until STOPF flag is reset */
|
|
if (I2C_WaitOnSTOPFlagUntilTimeout(hi2c, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear STOP Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Clear Configuration Register 2 */
|
|
I2C_RESET_CR2(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
/**
|
|
* @brief Write an amount of data in non-blocking mode with Interrupt to a specific memory address
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param MemAddress Internal memory address
|
|
* @param MemAddSize Size of internal memory address
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
|
|
{
|
|
uint32_t tickstart;
|
|
uint32_t xfermode;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Init tickstart for timeout management*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_MEM;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Master_ISR_IT;
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = I2C_AUTOEND_MODE;
|
|
}
|
|
|
|
/* Send Slave Address and Memory Address */
|
|
if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
|
|
{
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
|
|
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
|
|
/* possible to enable all of these */
|
|
/* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Read an amount of data in non-blocking mode with Interrupt from a specific memory address
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param MemAddress Internal memory address
|
|
* @param MemAddSize Size of internal memory address
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
|
|
{
|
|
uint32_t tickstart;
|
|
uint32_t xfermode;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Init tickstart for timeout management*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_MEM;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Master_ISR_IT;
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = I2C_AUTOEND_MODE;
|
|
}
|
|
|
|
/* Send Slave Address and Memory Address */
|
|
if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
|
|
{
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
|
|
/* Enable ERR, TC, STOP, NACK, RXI interrupt */
|
|
/* possible to enable all of these */
|
|
/* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
/**
|
|
* @brief Write an amount of data in non-blocking mode with DMA to a specific memory address
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param MemAddress Internal memory address
|
|
* @param MemAddSize Size of internal memory address
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
|
|
{
|
|
uint32_t tickstart;
|
|
uint32_t xfermode;
|
|
HAL_StatusTypeDef dmaxferstatus;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Init tickstart for timeout management*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_MEM;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Master_ISR_DMA;
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = I2C_AUTOEND_MODE;
|
|
}
|
|
|
|
/* Send Slave Address and Memory Address */
|
|
if (I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
|
|
{
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
/* Set the I2C DMA transfer complete callback */
|
|
hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
|
|
|
|
/* Set the unused DMA callbacks to NULL */
|
|
hi2c->hdmatx->XferHalfCpltCallback = NULL;
|
|
hi2c->hdmatx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (dmaxferstatus == HAL_OK)
|
|
{
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
|
|
|
|
/* Update XferCount value */
|
|
hi2c->XferCount -= hi2c->XferSize;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR and NACK interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
|
|
|
|
/* Enable DMA Request */
|
|
hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Reads an amount of data in non-blocking mode with DMA from a specific memory address.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param MemAddress Internal memory address
|
|
* @param MemAddSize Size of internal memory address
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be read
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
|
|
{
|
|
uint32_t tickstart;
|
|
uint32_t xfermode;
|
|
HAL_StatusTypeDef dmaxferstatus;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Init tickstart for timeout management*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_MEM;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferISR = I2C_Master_ISR_DMA;
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = I2C_AUTOEND_MODE;
|
|
}
|
|
|
|
/* Send Slave Address and Memory Address */
|
|
if (I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG, tickstart) != HAL_OK)
|
|
{
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
/* Set the I2C DMA transfer complete callback */
|
|
hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
|
|
|
|
/* Set the unused DMA callbacks to NULL */
|
|
hi2c->hdmarx->XferHalfCpltCallback = NULL;
|
|
hi2c->hdmarx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (dmaxferstatus == HAL_OK)
|
|
{
|
|
/* Set NBYTES to write and reload if hi2c->XferCount > MAX_NBYTE_SIZE and generate RESTART */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, I2C_GENERATE_START_READ);
|
|
|
|
/* Update XferCount value */
|
|
hi2c->XferCount -= hi2c->XferSize;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR and NACK interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
|
|
|
|
/* Enable DMA Request */
|
|
hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Checks if target device is ready for communication.
|
|
* @note This function is used with Memory devices
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param Trials Number of trials
|
|
* @param Timeout Timeout duration
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart;
|
|
|
|
__IO uint32_t I2C_Trials = 0UL;
|
|
|
|
FlagStatus tmp1;
|
|
FlagStatus tmp2;
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BUSY) == SET)
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
do
|
|
{
|
|
/* Generate Start */
|
|
hi2c->Instance->CR2 = I2C_GENERATE_START(hi2c->Init.AddressingMode, DevAddress);
|
|
|
|
/* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
|
|
/* Wait until STOPF flag is set or a NACK flag is set*/
|
|
tickstart = HAL_GetTick();
|
|
|
|
tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
while ((tmp1 == RESET) && (tmp2 == RESET))
|
|
{
|
|
if (Timeout != HAL_MAX_DELAY)
|
|
{
|
|
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
|
|
}
|
|
|
|
/* Check if the NACKF flag has not been set */
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == RESET)
|
|
{
|
|
/* Wait until STOPF flag is reset */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear STOP Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Device is ready */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
/* Wait until STOPF flag is reset */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
/* Clear STOP Flag, auto generated with autoend*/
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
}
|
|
|
|
/* Check if the maximum allowed number of trials has been reached */
|
|
if (I2C_Trials == Trials)
|
|
{
|
|
/* Generate Stop */
|
|
hi2c->Instance->CR2 |= I2C_CR2_STOP;
|
|
|
|
/* Wait until STOPF flag is reset */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout, tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Clear STOP Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
}
|
|
|
|
/* Increment Trials */
|
|
I2C_Trials++;
|
|
} while (I2C_Trials < Trials);
|
|
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with Interrupt.
|
|
* @note This interface allow to manage repeated start condition when a direction change during transfer
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
uint16_t Size, uint32_t XferOptions)
|
|
{
|
|
uint32_t xfermode;
|
|
uint32_t xferrequest = I2C_GENERATE_START_WRITE;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_MASTER;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = XferOptions;
|
|
hi2c->XferISR = I2C_Master_ISR_IT;
|
|
|
|
/* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = hi2c->XferOptions;
|
|
}
|
|
|
|
/* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
|
|
/* Mean Previous state is same as current state */
|
|
if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
|
|
{
|
|
xferrequest = I2C_NO_STARTSTOP;
|
|
}
|
|
else
|
|
{
|
|
/* Convert OTHER_xxx XferOptions if any */
|
|
I2C_ConvertOtherXferOptions(hi2c);
|
|
|
|
/* Update xfermode accordingly if no reload is necessary */
|
|
if (hi2c->XferCount <= MAX_NBYTE_SIZE)
|
|
{
|
|
xfermode = hi2c->XferOptions;
|
|
}
|
|
}
|
|
|
|
/* Send Slave Address and set NBYTES to write */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Sequential transmit in master I2C mode an amount of data in non-blocking mode with DMA.
|
|
* @note This interface allow to manage repeated start condition when a direction change during transfer
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
uint16_t Size, uint32_t XferOptions)
|
|
{
|
|
uint32_t xfermode;
|
|
uint32_t xferrequest = I2C_GENERATE_START_WRITE;
|
|
HAL_StatusTypeDef dmaxferstatus;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX;
|
|
hi2c->Mode = HAL_I2C_MODE_MASTER;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = XferOptions;
|
|
hi2c->XferISR = I2C_Master_ISR_DMA;
|
|
|
|
/* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = hi2c->XferOptions;
|
|
}
|
|
|
|
/* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
|
|
/* Mean Previous state is same as current state */
|
|
if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_TX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
|
|
{
|
|
xferrequest = I2C_NO_STARTSTOP;
|
|
}
|
|
else
|
|
{
|
|
/* Convert OTHER_xxx XferOptions if any */
|
|
I2C_ConvertOtherXferOptions(hi2c);
|
|
|
|
/* Update xfermode accordingly if no reload is necessary */
|
|
if (hi2c->XferCount <= MAX_NBYTE_SIZE)
|
|
{
|
|
xfermode = hi2c->XferOptions;
|
|
}
|
|
}
|
|
|
|
if (hi2c->XferSize > 0U)
|
|
{
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
/* Set the I2C DMA transfer complete callback */
|
|
hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
|
|
|
|
/* Set the unused DMA callbacks to NULL */
|
|
hi2c->hdmatx->XferHalfCpltCallback = NULL;
|
|
hi2c->hdmatx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (dmaxferstatus == HAL_OK)
|
|
{
|
|
/* Send Slave Address and set NBYTES to write */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest);
|
|
|
|
/* Update XferCount value */
|
|
hi2c->XferCount -= hi2c->XferSize;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR and NACK interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
|
|
|
|
/* Enable DMA Request */
|
|
hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update Transfer ISR function pointer */
|
|
hi2c->XferISR = I2C_Master_ISR_IT;
|
|
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to write and generate START condition */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_WRITE);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
|
|
/* possible to enable all of these */
|
|
/* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with Interrupt
|
|
* @note This interface allow to manage repeated start condition when a direction change during transfer
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
uint16_t Size, uint32_t XferOptions)
|
|
{
|
|
uint32_t xfermode;
|
|
uint32_t xferrequest = I2C_GENERATE_START_READ;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_MASTER;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = XferOptions;
|
|
hi2c->XferISR = I2C_Master_ISR_IT;
|
|
|
|
/* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = hi2c->XferOptions;
|
|
}
|
|
|
|
/* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
|
|
/* Mean Previous state is same as current state */
|
|
if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
|
|
{
|
|
xferrequest = I2C_NO_STARTSTOP;
|
|
}
|
|
else
|
|
{
|
|
/* Convert OTHER_xxx XferOptions if any */
|
|
I2C_ConvertOtherXferOptions(hi2c);
|
|
|
|
/* Update xfermode accordingly if no reload is necessary */
|
|
if (hi2c->XferCount <= MAX_NBYTE_SIZE)
|
|
{
|
|
xfermode = hi2c->XferOptions;
|
|
}
|
|
}
|
|
|
|
/* Send Slave Address and set NBYTES to read */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Sequential receive in master I2C mode an amount of data in non-blocking mode with DMA
|
|
* @note This interface allow to manage repeated start condition when a direction change during transfer
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData,
|
|
uint16_t Size, uint32_t XferOptions)
|
|
{
|
|
uint32_t xfermode;
|
|
uint32_t xferrequest = I2C_GENERATE_START_READ;
|
|
HAL_StatusTypeDef dmaxferstatus;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX;
|
|
hi2c->Mode = HAL_I2C_MODE_MASTER;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferOptions = XferOptions;
|
|
hi2c->XferISR = I2C_Master_ISR_DMA;
|
|
|
|
/* If hi2c->XferCount > MAX_NBYTE_SIZE, use reload mode */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
xfermode = hi2c->XferOptions;
|
|
}
|
|
|
|
/* If transfer direction not change and there is no request to start another frame, do not generate Restart Condition */
|
|
/* Mean Previous state is same as current state */
|
|
if ((hi2c->PreviousState == I2C_STATE_MASTER_BUSY_RX) && (IS_I2C_TRANSFER_OTHER_OPTIONS_REQUEST(XferOptions) == 0))
|
|
{
|
|
xferrequest = I2C_NO_STARTSTOP;
|
|
}
|
|
else
|
|
{
|
|
/* Convert OTHER_xxx XferOptions if any */
|
|
I2C_ConvertOtherXferOptions(hi2c);
|
|
|
|
/* Update xfermode accordingly if no reload is necessary */
|
|
if (hi2c->XferCount <= MAX_NBYTE_SIZE)
|
|
{
|
|
xfermode = hi2c->XferOptions;
|
|
}
|
|
}
|
|
|
|
if (hi2c->XferSize > 0U)
|
|
{
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
/* Set the I2C DMA transfer complete callback */
|
|
hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
|
|
|
|
/* Set the unused DMA callbacks to NULL */
|
|
hi2c->hdmarx->XferHalfCpltCallback = NULL;
|
|
hi2c->hdmarx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (dmaxferstatus == HAL_OK)
|
|
{
|
|
/* Send Slave Address and set NBYTES to read */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, xfermode, xferrequest);
|
|
|
|
/* Update XferCount value */
|
|
hi2c->XferCount -= hi2c->XferSize;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR and NACK interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_ERROR_IT);
|
|
|
|
/* Enable DMA Request */
|
|
hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Update Transfer ISR function pointer */
|
|
hi2c->XferISR = I2C_Master_ISR_IT;
|
|
|
|
/* Send Slave Address */
|
|
/* Set NBYTES to read and generate START condition */
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_GENERATE_START_READ);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR, TC, STOP, NACK, TXI interrupt */
|
|
/* possible to enable all of these */
|
|
/* I2C_IT_ERRI | I2C_IT_TCI| I2C_IT_STOPI| I2C_IT_NACKI | I2C_IT_ADDRI | I2C_IT_RXI | I2C_IT_TXI */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
|
|
* @note This interface allow to manage repeated start condition when a direction change during transfer
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
|
uint32_t XferOptions)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
|
|
|
|
if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Disable Interrupts, to prevent preemption during treatment in case of multicall */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT);
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
|
|
/* and then toggle the HAL slave RX state to TX state */
|
|
if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
|
|
{
|
|
/* Disable associated Interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
|
|
|
|
/* Abort DMA Xfer if any */
|
|
if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
|
|
{
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
|
|
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
/* Set the I2C DMA Abort callback :
|
|
will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
|
|
hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
|
|
|
|
/* Abort DMA RX */
|
|
if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
|
|
{
|
|
/* Call Directly XferAbortCallback function in case of error */
|
|
hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_SLAVE;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Enable Address Acknowledge */
|
|
hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
hi2c->XferOptions = XferOptions;
|
|
hi2c->XferISR = I2C_Slave_ISR_IT;
|
|
|
|
if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE)
|
|
{
|
|
/* Clear ADDR flag after prepare the transfer parameters */
|
|
/* This action will generate an acknowledge to the Master */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* REnable ADDR interrupt */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_TX_IT | I2C_XFER_LISTEN_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Sequential transmit in slave/device I2C mode an amount of data in non-blocking mode with DMA
|
|
* @note This interface allow to manage repeated start condition when a direction change during transfer
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
|
uint32_t XferOptions)
|
|
{
|
|
HAL_StatusTypeDef dmaxferstatus;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
|
|
|
|
if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Disable Interrupts, to prevent preemption during treatment in case of multicall */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT);
|
|
|
|
/* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
|
|
/* and then toggle the HAL slave RX state to TX state */
|
|
if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
|
|
{
|
|
/* Disable associated Interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
|
|
|
|
if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
|
|
{
|
|
/* Abort DMA Xfer if any */
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
|
|
|
|
/* Set the I2C DMA Abort callback :
|
|
will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
|
|
hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
|
|
|
|
/* Abort DMA RX */
|
|
if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
|
|
{
|
|
/* Call Directly XferAbortCallback function in case of error */
|
|
hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
|
|
{
|
|
if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
|
|
{
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
|
|
|
|
/* Abort DMA Xfer if any */
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
/* Set the I2C DMA Abort callback :
|
|
will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
|
|
hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
|
|
|
|
/* Abort DMA TX */
|
|
if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
|
|
{
|
|
/* Call Directly XferAbortCallback function in case of error */
|
|
hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_TX_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_SLAVE;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Enable Address Acknowledge */
|
|
hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
hi2c->XferOptions = XferOptions;
|
|
hi2c->XferISR = I2C_Slave_ISR_DMA;
|
|
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
/* Set the I2C DMA transfer complete callback */
|
|
hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
|
|
|
|
/* Set the unused DMA callbacks to NULL */
|
|
hi2c->hdmatx->XferHalfCpltCallback = NULL;
|
|
hi2c->hdmatx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize);
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (dmaxferstatus == HAL_OK)
|
|
{
|
|
/* Update XferCount value */
|
|
hi2c->XferCount -= hi2c->XferSize;
|
|
|
|
/* Reset XferSize */
|
|
hi2c->XferSize = 0;
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_RECEIVE)
|
|
{
|
|
/* Clear ADDR flag after prepare the transfer parameters */
|
|
/* This action will generate an acknowledge to the Master */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* Enable ERR, STOP, NACK, ADDR interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
|
|
|
|
/* Enable DMA Request */
|
|
hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with Interrupt
|
|
* @note This interface allow to manage repeated start condition when a direction change during transfer
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
|
uint32_t XferOptions)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
|
|
|
|
if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Disable Interrupts, to prevent preemption during treatment in case of multicall */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
|
|
/* and then toggle the HAL slave TX state to RX state */
|
|
if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
|
|
{
|
|
/* Disable associated Interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
|
|
if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
|
|
{
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
|
|
|
|
/* Abort DMA Xfer if any */
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
/* Set the I2C DMA Abort callback :
|
|
will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
|
|
hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
|
|
|
|
/* Abort DMA TX */
|
|
if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
|
|
{
|
|
/* Call Directly XferAbortCallback function in case of error */
|
|
hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_SLAVE;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Enable Address Acknowledge */
|
|
hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
hi2c->XferOptions = XferOptions;
|
|
hi2c->XferISR = I2C_Slave_ISR_IT;
|
|
|
|
if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT)
|
|
{
|
|
/* Clear ADDR flag after prepare the transfer parameters */
|
|
/* This action will generate an acknowledge to the Master */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* REnable ADDR interrupt */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Sequential receive in slave/device I2C mode an amount of data in non-blocking mode with DMA
|
|
* @note This interface allow to manage repeated start condition when a direction change during transfer
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param pData Pointer to data buffer
|
|
* @param Size Amount of data to be sent
|
|
* @param XferOptions Options of Transfer, value of @ref I2C_XFEROPTIONS
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Slave_Seq_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size,
|
|
uint32_t XferOptions)
|
|
{
|
|
HAL_StatusTypeDef dmaxferstatus;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_TRANSFER_OPTIONS_REQUEST(XferOptions));
|
|
|
|
if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN)
|
|
{
|
|
if ((pData == NULL) || (Size == 0U))
|
|
{
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_INVALID_PARAM;
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Disable Interrupts, to prevent preemption during treatment in case of multicall */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* I2C cannot manage full duplex exchange so disable previous IT enabled if any */
|
|
/* and then toggle the HAL slave TX state to RX state */
|
|
if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
|
|
{
|
|
/* Disable associated Interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
|
|
if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
|
|
{
|
|
/* Abort DMA Xfer if any */
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
|
|
|
|
/* Set the I2C DMA Abort callback :
|
|
will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
|
|
hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
|
|
|
|
/* Abort DMA TX */
|
|
if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
|
|
{
|
|
/* Call Directly XferAbortCallback function in case of error */
|
|
hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
|
|
{
|
|
if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
|
|
{
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
|
|
|
|
/* Abort DMA Xfer if any */
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
/* Set the I2C DMA Abort callback :
|
|
will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
|
|
hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
|
|
|
|
/* Abort DMA RX */
|
|
if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
|
|
{
|
|
/* Call Directly XferAbortCallback function in case of error */
|
|
hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
|
|
hi2c->State = HAL_I2C_STATE_BUSY_RX_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_SLAVE;
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
|
|
/* Enable Address Acknowledge */
|
|
hi2c->Instance->CR2 &= ~I2C_CR2_NACK;
|
|
|
|
/* Prepare transfer parameters */
|
|
hi2c->pBuffPtr = pData;
|
|
hi2c->XferCount = Size;
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
hi2c->XferOptions = XferOptions;
|
|
hi2c->XferISR = I2C_Slave_ISR_DMA;
|
|
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
/* Set the I2C DMA transfer complete callback */
|
|
hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
|
|
|
|
/* Set the DMA error callback */
|
|
hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
|
|
|
|
/* Set the unused DMA callbacks to NULL */
|
|
hi2c->hdmarx->XferHalfCpltCallback = NULL;
|
|
hi2c->hdmarx->XferAbortCallback = NULL;
|
|
|
|
/* Enable the DMA channel */
|
|
dmaxferstatus = HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)pData, hi2c->XferSize);
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA_PARAM;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (dmaxferstatus == HAL_OK)
|
|
{
|
|
/* Update XferCount value */
|
|
hi2c->XferCount -= hi2c->XferSize;
|
|
|
|
/* Reset XferSize */
|
|
hi2c->XferSize = 0;
|
|
}
|
|
else
|
|
{
|
|
/* Update I2C state */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Update I2C error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
if (I2C_GET_DIR(hi2c) == I2C_DIRECTION_TRANSMIT)
|
|
{
|
|
/* Clear ADDR flag after prepare the transfer parameters */
|
|
/* This action will generate an acknowledge to the Master */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
/* REnable ADDR interrupt */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_LISTEN_IT);
|
|
|
|
/* Enable DMA Request */
|
|
hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Enable the Address listen mode with Interrupt.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_EnableListen_IT(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
if (hi2c->State == HAL_I2C_STATE_READY)
|
|
{
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->XferISR = I2C_Slave_ISR_IT;
|
|
|
|
/* Enable the Address Match interrupt */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Disable the Address listen mode with Interrupt.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_DisableListen_IT(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Declaration of tmp to prevent undefined behavior of volatile usage */
|
|
uint32_t tmp;
|
|
|
|
/* Disable Address listen mode only if a transfer is not ongoing */
|
|
if (hi2c->State == HAL_I2C_STATE_LISTEN)
|
|
{
|
|
tmp = (uint32_t)(hi2c->State) & I2C_STATE_MSK;
|
|
hi2c->PreviousState = tmp | (uint32_t)(hi2c->Mode);
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
hi2c->XferISR = NULL;
|
|
|
|
/* Disable the Address Match interrupt */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
return HAL_BUSY;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Abort a master I2C IT or DMA process communication with Interrupt.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef HAL_I2C_Master_Abort_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress)
|
|
{
|
|
if (hi2c->Mode == HAL_I2C_MODE_MASTER)
|
|
{
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Disable Interrupts and Store Previous state */
|
|
if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
|
|
{
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX;
|
|
}
|
|
else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
|
|
{
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
|
|
hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
|
|
}
|
|
else
|
|
{
|
|
/* Do nothing */
|
|
}
|
|
|
|
/* Set State at HAL_I2C_STATE_ABORT */
|
|
hi2c->State = HAL_I2C_STATE_ABORT;
|
|
|
|
/* Set NBYTES to 1 to generate a dummy read on I2C peripheral */
|
|
/* Set AUTOEND mode, this will generate a NACK then STOP condition to abort the current transfer */
|
|
I2C_TransferConfig(hi2c, DevAddress, 1, I2C_AUTOEND_MODE, I2C_GENERATE_STOP);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Note : The I2C interrupts must be enabled after unlocking current process
|
|
to avoid the risk of I2C interrupt handle execution before current
|
|
process unlock */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
|
|
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
/* Wrong usage of abort function */
|
|
/* This function should be used only in case of abort monitored by master device */
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief This function handles I2C event interrupt request.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Get current IT Flags and IT sources value */
|
|
uint32_t itflags = READ_REG(hi2c->Instance->ISR);
|
|
uint32_t itsources = READ_REG(hi2c->Instance->CR1);
|
|
|
|
/* I2C events treatment -------------------------------------*/
|
|
if (hi2c->XferISR != NULL)
|
|
{
|
|
hi2c->XferISR(hi2c, itflags, itsources);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief This function handles I2C error interrupt request.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
uint32_t itflags = READ_REG(hi2c->Instance->ISR);
|
|
uint32_t itsources = READ_REG(hi2c->Instance->CR1);
|
|
uint32_t tmperror;
|
|
|
|
/* I2C Bus error interrupt occurred ------------------------------------*/
|
|
if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_BERR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
|
|
{
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
|
|
|
|
/* Clear BERR flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
|
|
}
|
|
|
|
/* I2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
|
|
if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_OVR) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
|
|
{
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
|
|
|
|
/* Clear OVR flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
|
|
}
|
|
|
|
/* I2C Arbitration Loss error interrupt occurred -------------------------------------*/
|
|
if ((I2C_CHECK_FLAG(itflags, I2C_FLAG_ARLO) != RESET) && (I2C_CHECK_IT_SOURCE(itsources, I2C_IT_ERRI) != RESET))
|
|
{
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
|
|
|
|
/* Clear ARLO flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
|
|
}
|
|
|
|
/* Store current volatile hi2c->ErrorCode, misra rule */
|
|
tmperror = hi2c->ErrorCode;
|
|
|
|
/* Call the Error Callback in case of Error detected */
|
|
if ((tmperror & (HAL_I2C_ERROR_BERR | HAL_I2C_ERROR_OVR | HAL_I2C_ERROR_ARLO)) != HAL_I2C_ERROR_NONE)
|
|
{
|
|
I2C_ITError(hi2c, tmperror);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Master Tx Transfer completed callback.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_MasterTxCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Master Rx Transfer completed callback.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_MasterRxCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/** @brief Slave Tx Transfer completed callback.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_SlaveTxCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Slave Rx Transfer completed callback.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_SlaveRxCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Slave Address Match callback.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param TransferDirection Master request Transfer Direction (Write/Read), value of @ref I2C_XFERDIRECTION
|
|
* @param AddrMatchCode Address Match Code
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_AddrCallback(I2C_HandleTypeDef *hi2c, uint8_t TransferDirection, uint16_t AddrMatchCode)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
UNUSED(TransferDirection);
|
|
UNUSED(AddrMatchCode);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_AddrCallback() could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Listen Complete callback.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_ListenCpltCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_ListenCpltCallback() could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Memory Tx Transfer completed callback.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_MemTxCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief Memory Rx Transfer completed callback.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_MemRxCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief I2C error callback.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_ErrorCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @brief I2C abort callback.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval None
|
|
*/
|
|
__weak void HAL_I2C_AbortCpltCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(hi2c);
|
|
|
|
/* NOTE : This function should not be modified, when the callback is needed,
|
|
the HAL_I2C_AbortCpltCallback could be implemented in the user file
|
|
*/
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup I2C_Exported_Functions_Group3 Peripheral State, Mode and Error functions
|
|
* @brief Peripheral State, Mode and Error functions
|
|
*
|
|
@verbatim
|
|
===============================================================================
|
|
##### Peripheral State, Mode and Error functions #####
|
|
===============================================================================
|
|
[..]
|
|
This subsection permit to get in run-time the status of the peripheral
|
|
and the data flow.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Return the I2C handle state.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval HAL state
|
|
*/
|
|
HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Return I2C handle state */
|
|
return hi2c->State;
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the I2C Master, Slave, Memory or no mode.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for I2C module
|
|
* @retval HAL mode
|
|
*/
|
|
HAL_I2C_ModeTypeDef HAL_I2C_GetMode(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
return hi2c->Mode;
|
|
}
|
|
|
|
/**
|
|
* @brief Return the I2C error code.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @retval I2C Error Code
|
|
*/
|
|
uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
return hi2c->ErrorCode;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup I2C_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with Interrupt.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param ITFlags Interrupt flags to handle.
|
|
* @param ITSources Interrupt sources enabled.
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_Master_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
|
|
{
|
|
uint16_t devaddress;
|
|
uint32_t tmpITFlags = ITFlags;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
|
|
{
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
/* Set corresponding Error Code */
|
|
/* No need to generate STOP, it is automatically done */
|
|
/* Error callback will be send during stop flag treatment */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
|
|
|
|
/* Flush TX register */
|
|
I2C_Flush_TXDR(hi2c);
|
|
}
|
|
else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET))
|
|
{
|
|
/* Remove RXNE flag on temporary variable as read done */
|
|
tmpITFlags &= ~I2C_FLAG_RXNE;
|
|
|
|
/* Read data from RXDR */
|
|
*hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferSize--;
|
|
hi2c->XferCount--;
|
|
}
|
|
else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))
|
|
{
|
|
/* Write data to TXDR */
|
|
hi2c->Instance->TXDR = *hi2c->pBuffPtr;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferSize--;
|
|
hi2c->XferCount--;
|
|
}
|
|
else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
|
|
{
|
|
if ((hi2c->XferCount != 0U) && (hi2c->XferSize == 0U))
|
|
{
|
|
devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD);
|
|
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_RELOAD_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
|
|
{
|
|
I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, hi2c->XferOptions, I2C_NO_STARTSTOP);
|
|
}
|
|
else
|
|
{
|
|
I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, I2C_AUTOEND_MODE, I2C_NO_STARTSTOP);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Call TxCpltCallback() if no stop mode is set */
|
|
if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
|
|
{
|
|
/* Call I2C Master Sequential complete process */
|
|
I2C_ITMasterSeqCplt(hi2c);
|
|
}
|
|
else
|
|
{
|
|
/* Wrong size Status regarding TCR flag event */
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
|
|
}
|
|
}
|
|
}
|
|
else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
|
|
{
|
|
if (hi2c->XferCount == 0U)
|
|
{
|
|
if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
|
|
{
|
|
/* Generate a stop condition in case of no transfer option */
|
|
if (hi2c->XferOptions == I2C_NO_OPTION_FRAME)
|
|
{
|
|
/* Generate Stop */
|
|
hi2c->Instance->CR2 |= I2C_CR2_STOP;
|
|
}
|
|
else
|
|
{
|
|
/* Call I2C Master Sequential complete process */
|
|
I2C_ITMasterSeqCplt(hi2c);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Wrong size Status regarding TC flag event */
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
|
|
if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
|
|
{
|
|
/* Call I2C Master complete process */
|
|
I2C_ITMasterCplt(hi2c, tmpITFlags);
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with Interrupt.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param ITFlags Interrupt flags to handle.
|
|
* @param ITSources Interrupt sources enabled.
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_Slave_ISR_IT(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
|
|
{
|
|
uint32_t tmpoptions = hi2c->XferOptions;
|
|
uint32_t tmpITFlags = ITFlags;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Check if STOPF is set */
|
|
if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
|
|
{
|
|
/* Call I2C Slave complete process */
|
|
I2C_ITSlaveCplt(hi2c, tmpITFlags);
|
|
}
|
|
|
|
if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
|
|
{
|
|
/* Check that I2C transfer finished */
|
|
/* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
|
|
/* Mean XferCount == 0*/
|
|
/* So clear Flag NACKF only */
|
|
if (hi2c->XferCount == 0U)
|
|
{
|
|
/* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */
|
|
if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME))
|
|
{
|
|
/* Call I2C Listen complete process */
|
|
I2C_ITListenCplt(hi2c, tmpITFlags);
|
|
}
|
|
else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME))
|
|
{
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
/* Flush TX register */
|
|
I2C_Flush_TXDR(hi2c);
|
|
|
|
/* Last Byte is Transmitted */
|
|
/* Call I2C Slave Sequential complete process */
|
|
I2C_ITSlaveSeqCplt(hi2c);
|
|
}
|
|
else
|
|
{
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
/* Set ErrorCode corresponding to a Non-Acknowledge */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
|
|
|
|
if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME))
|
|
{
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, hi2c->ErrorCode);
|
|
}
|
|
}
|
|
}
|
|
else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_RXI) != RESET))
|
|
{
|
|
if (hi2c->XferCount > 0U)
|
|
{
|
|
/* Read data from RXDR */
|
|
*hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferSize--;
|
|
hi2c->XferCount--;
|
|
}
|
|
|
|
if ((hi2c->XferCount == 0U) && \
|
|
(tmpoptions != I2C_NO_OPTION_FRAME))
|
|
{
|
|
/* Call I2C Slave Sequential complete process */
|
|
I2C_ITSlaveSeqCplt(hi2c);
|
|
}
|
|
}
|
|
else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_ADDR) != RESET) && \
|
|
(I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET))
|
|
{
|
|
I2C_ITAddrCplt(hi2c, tmpITFlags);
|
|
}
|
|
else if ((I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_TXIS) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TXI) != RESET))
|
|
{
|
|
/* Write data to TXDR only if XferCount not reach "0" */
|
|
/* A TXIS flag can be set, during STOP treatment */
|
|
/* Check if all data have already been sent */
|
|
/* If it is the case, this last write in TXDR is not sent, correspond to a dummy TXIS event */
|
|
if (hi2c->XferCount > 0U)
|
|
{
|
|
/* Write data to TXDR */
|
|
hi2c->Instance->TXDR = *hi2c->pBuffPtr;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
hi2c->XferCount--;
|
|
hi2c->XferSize--;
|
|
}
|
|
else
|
|
{
|
|
if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME))
|
|
{
|
|
/* Last Byte is Transmitted */
|
|
/* Call I2C Slave Sequential complete process */
|
|
I2C_ITSlaveSeqCplt(hi2c);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Interrupt Sub-Routine which handle the Interrupt Flags Master Mode with DMA.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param ITFlags Interrupt flags to handle.
|
|
* @param ITSources Interrupt sources enabled.
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_Master_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
|
|
{
|
|
uint16_t devaddress;
|
|
uint32_t xfermode;
|
|
|
|
/* Process Locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
|
|
{
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
/* Set corresponding Error Code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
|
|
|
|
/* No need to generate STOP, it is automatically done */
|
|
/* But enable STOP interrupt, to treat it */
|
|
/* Error callback will be send during stop flag treatment */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
|
|
|
|
/* Flush TX register */
|
|
I2C_Flush_TXDR(hi2c);
|
|
}
|
|
else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TCR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
|
|
{
|
|
/* Disable TC interrupt */
|
|
__HAL_I2C_DISABLE_IT(hi2c, I2C_IT_TCI);
|
|
|
|
if (hi2c->XferCount != 0U)
|
|
{
|
|
/* Recover Slave address */
|
|
devaddress = (uint16_t)(hi2c->Instance->CR2 & I2C_CR2_SADD);
|
|
|
|
/* Prepare the new XferSize to transfer */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
xfermode = I2C_RELOAD_MODE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
|
|
{
|
|
xfermode = hi2c->XferOptions;
|
|
}
|
|
else
|
|
{
|
|
xfermode = I2C_AUTOEND_MODE;
|
|
}
|
|
}
|
|
|
|
/* Set the new XferSize in Nbytes register */
|
|
I2C_TransferConfig(hi2c, devaddress, (uint8_t)hi2c->XferSize, xfermode, I2C_NO_STARTSTOP);
|
|
|
|
/* Update XferCount value */
|
|
hi2c->XferCount -= hi2c->XferSize;
|
|
|
|
/* Enable DMA Request */
|
|
if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
|
|
{
|
|
hi2c->Instance->CR1 |= I2C_CR1_RXDMAEN;
|
|
}
|
|
else
|
|
{
|
|
hi2c->Instance->CR1 |= I2C_CR1_TXDMAEN;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Call TxCpltCallback() if no stop mode is set */
|
|
if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
|
|
{
|
|
/* Call I2C Master Sequential complete process */
|
|
I2C_ITMasterSeqCplt(hi2c);
|
|
}
|
|
else
|
|
{
|
|
/* Wrong size Status regarding TCR flag event */
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
|
|
}
|
|
}
|
|
}
|
|
else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_TC) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_TCI) != RESET))
|
|
{
|
|
if (hi2c->XferCount == 0U)
|
|
{
|
|
if (I2C_GET_STOP_MODE(hi2c) != I2C_AUTOEND_MODE)
|
|
{
|
|
/* Generate a stop condition in case of no transfer option */
|
|
if (hi2c->XferOptions == I2C_NO_OPTION_FRAME)
|
|
{
|
|
/* Generate Stop */
|
|
hi2c->Instance->CR2 |= I2C_CR2_STOP;
|
|
}
|
|
else
|
|
{
|
|
/* Call I2C Master Sequential complete process */
|
|
I2C_ITMasterSeqCplt(hi2c);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Wrong size Status regarding TC flag event */
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, HAL_I2C_ERROR_SIZE);
|
|
}
|
|
}
|
|
else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
|
|
{
|
|
/* Call I2C Master complete process */
|
|
I2C_ITMasterCplt(hi2c, ITFlags);
|
|
}
|
|
else
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Interrupt Sub-Routine which handle the Interrupt Flags Slave Mode with DMA.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param ITFlags Interrupt flags to handle.
|
|
* @param ITSources Interrupt sources enabled.
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_Slave_ISR_DMA(struct __I2C_HandleTypeDef *hi2c, uint32_t ITFlags, uint32_t ITSources)
|
|
{
|
|
uint32_t tmpoptions = hi2c->XferOptions;
|
|
uint32_t treatdmanack = 0U;
|
|
HAL_I2C_StateTypeDef tmpstate;
|
|
|
|
/* Process locked */
|
|
__HAL_LOCK(hi2c);
|
|
|
|
/* Check if STOPF is set */
|
|
if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_STOPF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_STOPI) != RESET))
|
|
{
|
|
/* Call I2C Slave complete process */
|
|
I2C_ITSlaveCplt(hi2c, ITFlags);
|
|
}
|
|
|
|
if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_AF) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_NACKI) != RESET))
|
|
{
|
|
/* Check that I2C transfer finished */
|
|
/* if yes, normal use case, a NACK is sent by the MASTER when Transfer is finished */
|
|
/* Mean XferCount == 0 */
|
|
/* So clear Flag NACKF only */
|
|
if ((I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET) ||
|
|
(I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET))
|
|
{
|
|
/* Split check of hdmarx, for MISRA compliance */
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_RXDMAEN) != RESET)
|
|
{
|
|
if (__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U)
|
|
{
|
|
treatdmanack = 1U;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Split check of hdmatx, for MISRA compliance */
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
if (I2C_CHECK_IT_SOURCE(ITSources, I2C_CR1_TXDMAEN) != RESET)
|
|
{
|
|
if (__HAL_DMA_GET_COUNTER(hi2c->hdmatx) == 0U)
|
|
{
|
|
treatdmanack = 1U;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (treatdmanack == 1U)
|
|
{
|
|
/* Same action must be done for (tmpoptions == I2C_LAST_FRAME) which removed for Warning[Pa134]: left and right operands are identical */
|
|
if ((hi2c->State == HAL_I2C_STATE_LISTEN) && (tmpoptions == I2C_FIRST_AND_LAST_FRAME))
|
|
{
|
|
/* Call I2C Listen complete process */
|
|
I2C_ITListenCplt(hi2c, ITFlags);
|
|
}
|
|
else if ((hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN) && (tmpoptions != I2C_NO_OPTION_FRAME))
|
|
{
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
/* Flush TX register */
|
|
I2C_Flush_TXDR(hi2c);
|
|
|
|
/* Last Byte is Transmitted */
|
|
/* Call I2C Slave Sequential complete process */
|
|
I2C_ITSlaveSeqCplt(hi2c);
|
|
}
|
|
else
|
|
{
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* if no, error use case, a Non-Acknowledge of last Data is generated by the MASTER*/
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
/* Set ErrorCode corresponding to a Non-Acknowledge */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
|
|
|
|
/* Store current hi2c->State, solve MISRA2012-Rule-13.5 */
|
|
tmpstate = hi2c->State;
|
|
|
|
if ((tmpoptions == I2C_FIRST_FRAME) || (tmpoptions == I2C_NEXT_FRAME))
|
|
{
|
|
if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN))
|
|
{
|
|
hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX;
|
|
}
|
|
else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN))
|
|
{
|
|
hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
|
|
}
|
|
else
|
|
{
|
|
/* Do nothing */
|
|
}
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, hi2c->ErrorCode);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Only Clear NACK Flag, no DMA treatment is pending */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
}
|
|
}
|
|
else if ((I2C_CHECK_FLAG(ITFlags, I2C_FLAG_ADDR) != RESET) && (I2C_CHECK_IT_SOURCE(ITSources, I2C_IT_ADDRI) != RESET))
|
|
{
|
|
I2C_ITAddrCplt(hi2c, ITFlags);
|
|
}
|
|
else
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Master sends target device address followed by internal memory address for write request.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param MemAddress Internal memory address
|
|
* @param MemAddSize Size of internal memory address
|
|
* @param Timeout Timeout duration
|
|
* @param Tickstart Tick start value
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
|
|
{
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_RELOAD_MODE, I2C_GENERATE_START_WRITE);
|
|
|
|
/* Wait until TXIS flag is set */
|
|
if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* If Memory address size is 8Bit */
|
|
if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
|
|
{
|
|
/* Send Memory Address */
|
|
hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
|
|
}
|
|
/* If Memory address size is 16Bit */
|
|
else
|
|
{
|
|
/* Send MSB of Memory Address */
|
|
hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
|
|
|
|
/* Wait until TXIS flag is set */
|
|
if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Send LSB of Memory Address */
|
|
hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
|
|
}
|
|
|
|
/* Wait until TCR flag is set */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TCR, RESET, Timeout, Tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Master sends target device address followed by internal memory address for read request.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param DevAddress Target device address: The device 7 bits address value
|
|
* in datasheet must be shifted to the left before calling the interface
|
|
* @param MemAddress Internal memory address
|
|
* @param MemAddSize Size of internal memory address
|
|
* @param Timeout Timeout duration
|
|
* @param Tickstart Tick start value
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress,
|
|
uint16_t MemAddSize, uint32_t Timeout, uint32_t Tickstart)
|
|
{
|
|
I2C_TransferConfig(hi2c, DevAddress, (uint8_t)MemAddSize, I2C_SOFTEND_MODE, I2C_GENERATE_START_WRITE);
|
|
|
|
/* Wait until TXIS flag is set */
|
|
if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* If Memory address size is 8Bit */
|
|
if (MemAddSize == I2C_MEMADD_SIZE_8BIT)
|
|
{
|
|
/* Send Memory Address */
|
|
hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
|
|
}
|
|
/* If Memory address size is 16Bit */
|
|
else
|
|
{
|
|
/* Send MSB of Memory Address */
|
|
hi2c->Instance->TXDR = I2C_MEM_ADD_MSB(MemAddress);
|
|
|
|
/* Wait until TXIS flag is set */
|
|
if (I2C_WaitOnTXISFlagUntilTimeout(hi2c, Timeout, Tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Send LSB of Memory Address */
|
|
hi2c->Instance->TXDR = I2C_MEM_ADD_LSB(MemAddress);
|
|
}
|
|
|
|
/* Wait until TC flag is set */
|
|
if (I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TC, RESET, Timeout, Tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief I2C Address complete process callback.
|
|
* @param hi2c I2C handle.
|
|
* @param ITFlags Interrupt flags to handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_ITAddrCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
|
|
{
|
|
uint8_t transferdirection;
|
|
uint16_t slaveaddrcode;
|
|
uint16_t ownadd1code;
|
|
uint16_t ownadd2code;
|
|
|
|
/* Prevent unused argument(s) compilation warning */
|
|
UNUSED(ITFlags);
|
|
|
|
/* In case of Listen state, need to inform upper layer of address match code event */
|
|
if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) == (uint32_t)HAL_I2C_STATE_LISTEN)
|
|
{
|
|
transferdirection = I2C_GET_DIR(hi2c);
|
|
slaveaddrcode = I2C_GET_ADDR_MATCH(hi2c);
|
|
ownadd1code = I2C_GET_OWN_ADDRESS1(hi2c);
|
|
ownadd2code = I2C_GET_OWN_ADDRESS2(hi2c);
|
|
|
|
/* If 10bits addressing mode is selected */
|
|
if (hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
|
|
{
|
|
if ((slaveaddrcode & SlaveAddr_MSK) == ((ownadd1code >> SlaveAddr_SHIFT) & SlaveAddr_MSK))
|
|
{
|
|
slaveaddrcode = ownadd1code;
|
|
hi2c->AddrEventCount++;
|
|
if (hi2c->AddrEventCount == 2U)
|
|
{
|
|
/* Reset Address Event counter */
|
|
hi2c->AddrEventCount = 0U;
|
|
|
|
/* Clear ADDR flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call Slave Addr callback */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode);
|
|
#else
|
|
HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
else
|
|
{
|
|
slaveaddrcode = ownadd2code;
|
|
|
|
/* Disable ADDR Interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call Slave Addr callback */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode);
|
|
#else
|
|
HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
/* else 7 bits addressing mode is selected */
|
|
else
|
|
{
|
|
/* Disable ADDR Interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call Slave Addr callback */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->AddrCallback(hi2c, transferdirection, slaveaddrcode);
|
|
#else
|
|
HAL_I2C_AddrCallback(hi2c, transferdirection, slaveaddrcode);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
/* Else clear address flag only */
|
|
else
|
|
{
|
|
/* Clear ADDR flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ADDR);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief I2C Master sequential complete process.
|
|
* @param hi2c I2C handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_ITMasterSeqCplt(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* Reset I2C handle mode */
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* No Generate Stop, to permit restart mode */
|
|
/* The stop will be done at the end of transfer, when I2C_AUTOEND_MODE enable */
|
|
if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
|
|
{
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX;
|
|
hi2c->XferISR = NULL;
|
|
|
|
/* Disable Interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->MasterTxCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_MasterTxCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
/* hi2c->State == HAL_I2C_STATE_BUSY_RX */
|
|
else
|
|
{
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
|
|
hi2c->XferISR = NULL;
|
|
|
|
/* Disable Interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->MasterRxCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_MasterRxCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief I2C Slave sequential complete process.
|
|
* @param hi2c I2C handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_ITSlaveSeqCplt(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1);
|
|
|
|
/* Reset I2C handle mode */
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* If a DMA is ongoing, Update handle size context */
|
|
if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET)
|
|
{
|
|
/* Disable DMA Request */
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
|
|
}
|
|
else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET)
|
|
{
|
|
/* Disable DMA Request */
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
|
|
}
|
|
else
|
|
{
|
|
/* Do nothing */
|
|
}
|
|
|
|
if (hi2c->State == HAL_I2C_STATE_BUSY_TX_LISTEN)
|
|
{
|
|
/* Remove HAL_I2C_STATE_SLAVE_BUSY_TX, keep only HAL_I2C_STATE_LISTEN */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX;
|
|
|
|
/* Disable Interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->SlaveTxCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_SlaveTxCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
else if (hi2c->State == HAL_I2C_STATE_BUSY_RX_LISTEN)
|
|
{
|
|
/* Remove HAL_I2C_STATE_SLAVE_BUSY_RX, keep only HAL_I2C_STATE_LISTEN */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
|
|
|
|
/* Disable Interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->SlaveRxCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_SlaveRxCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
else
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief I2C Master complete process.
|
|
* @param hi2c I2C handle.
|
|
* @param ITFlags Interrupt flags to handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_ITMasterCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
|
|
{
|
|
uint32_t tmperror;
|
|
uint32_t tmpITFlags = ITFlags;
|
|
__IO uint32_t tmpreg;
|
|
|
|
/* Clear STOP Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Disable Interrupts and Store Previous state */
|
|
if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
|
|
{
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_TX_IT);
|
|
hi2c->PreviousState = I2C_STATE_MASTER_BUSY_TX;
|
|
}
|
|
else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
|
|
{
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT);
|
|
hi2c->PreviousState = I2C_STATE_MASTER_BUSY_RX;
|
|
}
|
|
else
|
|
{
|
|
/* Do nothing */
|
|
}
|
|
|
|
/* Clear Configuration Register 2 */
|
|
I2C_RESET_CR2(hi2c);
|
|
|
|
/* Reset handle parameters */
|
|
hi2c->XferISR = NULL;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
|
|
if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_AF) != RESET)
|
|
{
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
/* Set acknowledge error code */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
|
|
}
|
|
|
|
/* Fetch Last receive data if any */
|
|
if ((hi2c->State == HAL_I2C_STATE_ABORT) && (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET))
|
|
{
|
|
/* Read data from RXDR */
|
|
tmpreg = (uint8_t)hi2c->Instance->RXDR;
|
|
UNUSED(tmpreg);
|
|
}
|
|
|
|
/* Flush TX register */
|
|
I2C_Flush_TXDR(hi2c);
|
|
|
|
/* Store current volatile hi2c->ErrorCode, misra rule */
|
|
tmperror = hi2c->ErrorCode;
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
if ((hi2c->State == HAL_I2C_STATE_ABORT) || (tmperror != HAL_I2C_ERROR_NONE))
|
|
{
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, hi2c->ErrorCode);
|
|
}
|
|
/* hi2c->State == HAL_I2C_STATE_BUSY_TX */
|
|
else if (hi2c->State == HAL_I2C_STATE_BUSY_TX)
|
|
{
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->PreviousState = I2C_STATE_NONE;
|
|
|
|
if (hi2c->Mode == HAL_I2C_MODE_MEM)
|
|
{
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->MemTxCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_MemTxCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
else
|
|
{
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->MasterTxCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_MasterTxCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
/* hi2c->State == HAL_I2C_STATE_BUSY_RX */
|
|
else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
|
|
{
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->PreviousState = I2C_STATE_NONE;
|
|
|
|
if (hi2c->Mode == HAL_I2C_MODE_MEM)
|
|
{
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->MemRxCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_MemRxCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
else
|
|
{
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->MasterRxCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_MasterRxCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief I2C Slave complete process.
|
|
* @param hi2c I2C handle.
|
|
* @param ITFlags Interrupt flags to handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_ITSlaveCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
|
|
{
|
|
uint32_t tmpcr1value = READ_REG(hi2c->Instance->CR1);
|
|
uint32_t tmpITFlags = ITFlags;
|
|
HAL_I2C_StateTypeDef tmpstate = hi2c->State;
|
|
|
|
/* Clear STOP Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Disable Interrupts and Store Previous state */
|
|
if ((tmpstate == HAL_I2C_STATE_BUSY_TX) || (tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN))
|
|
{
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_TX_IT);
|
|
hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_TX;
|
|
}
|
|
else if ((tmpstate == HAL_I2C_STATE_BUSY_RX) || (tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN))
|
|
{
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT);
|
|
hi2c->PreviousState = I2C_STATE_SLAVE_BUSY_RX;
|
|
}
|
|
else
|
|
{
|
|
/* Do nothing */
|
|
}
|
|
|
|
/* Disable Address Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
|
|
/* Clear Configuration Register 2 */
|
|
I2C_RESET_CR2(hi2c);
|
|
|
|
/* Flush TX register */
|
|
I2C_Flush_TXDR(hi2c);
|
|
|
|
/* If a DMA is ongoing, Update handle size context */
|
|
if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_TXDMAEN) != RESET)
|
|
{
|
|
/* Disable DMA Request */
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
|
|
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmatx);
|
|
}
|
|
}
|
|
else if (I2C_CHECK_IT_SOURCE(tmpcr1value, I2C_CR1_RXDMAEN) != RESET)
|
|
{
|
|
/* Disable DMA Request */
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
|
|
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
hi2c->XferCount = (uint16_t)__HAL_DMA_GET_COUNTER(hi2c->hdmarx);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
/* Do nothing */
|
|
}
|
|
|
|
/* Store Last receive data if any */
|
|
if (I2C_CHECK_FLAG(tmpITFlags, I2C_FLAG_RXNE) != RESET)
|
|
{
|
|
/* Remove RXNE flag on temporary variable as read done */
|
|
tmpITFlags &= ~I2C_FLAG_RXNE;
|
|
|
|
/* Read data from RXDR */
|
|
*hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
if ((hi2c->XferSize > 0U))
|
|
{
|
|
hi2c->XferSize--;
|
|
hi2c->XferCount--;
|
|
}
|
|
}
|
|
|
|
/* All data are not transferred, so set error code accordingly */
|
|
if (hi2c->XferCount != 0U)
|
|
{
|
|
/* Set ErrorCode corresponding to a Non-Acknowledge */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
|
|
}
|
|
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
hi2c->XferISR = NULL;
|
|
|
|
if (hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
|
|
{
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, hi2c->ErrorCode);
|
|
|
|
/* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
|
|
if (hi2c->State == HAL_I2C_STATE_LISTEN)
|
|
{
|
|
/* Call I2C Listen complete process */
|
|
I2C_ITListenCplt(hi2c, tmpITFlags);
|
|
}
|
|
}
|
|
else if (hi2c->XferOptions != I2C_NO_OPTION_FRAME)
|
|
{
|
|
/* Call the Sequential Complete callback, to inform upper layer of the end of Transfer */
|
|
I2C_ITSlaveSeqCplt(hi2c);
|
|
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->PreviousState = I2C_STATE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->ListenCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_ListenCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
else if (hi2c->State == HAL_I2C_STATE_BUSY_RX)
|
|
{
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->PreviousState = I2C_STATE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->SlaveRxCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_SlaveRxCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
else
|
|
{
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->PreviousState = I2C_STATE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->SlaveTxCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_SlaveTxCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief I2C Listen complete process.
|
|
* @param hi2c I2C handle.
|
|
* @param ITFlags Interrupt flags to handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_ITListenCplt(I2C_HandleTypeDef *hi2c, uint32_t ITFlags)
|
|
{
|
|
/* Reset handle parameters */
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->PreviousState = I2C_STATE_NONE;
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
hi2c->XferISR = NULL;
|
|
|
|
/* Store Last receive data if any */
|
|
if (I2C_CHECK_FLAG(ITFlags, I2C_FLAG_RXNE) != RESET)
|
|
{
|
|
/* Read data from RXDR */
|
|
*hi2c->pBuffPtr = (uint8_t)hi2c->Instance->RXDR;
|
|
|
|
/* Increment Buffer pointer */
|
|
hi2c->pBuffPtr++;
|
|
|
|
if ((hi2c->XferSize > 0U))
|
|
{
|
|
hi2c->XferSize--;
|
|
hi2c->XferCount--;
|
|
|
|
/* Set ErrorCode corresponding to a Non-Acknowledge */
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
|
|
}
|
|
}
|
|
|
|
/* Disable all Interrupts*/
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
|
|
|
|
/* Clear NACK Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the Listen Complete callback, to inform upper layer of the end of Listen usecase */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->ListenCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_ListenCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
|
|
/**
|
|
* @brief I2C interrupts error process.
|
|
* @param hi2c I2C handle.
|
|
* @param ErrorCode Error code to handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_ITError(I2C_HandleTypeDef *hi2c, uint32_t ErrorCode)
|
|
{
|
|
HAL_I2C_StateTypeDef tmpstate = hi2c->State;
|
|
uint32_t tmppreviousstate;
|
|
|
|
/* Reset handle parameters */
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
hi2c->XferOptions = I2C_NO_OPTION_FRAME;
|
|
hi2c->XferCount = 0U;
|
|
|
|
/* Set new error code */
|
|
hi2c->ErrorCode |= ErrorCode;
|
|
|
|
/* Disable Interrupts */
|
|
if ((tmpstate == HAL_I2C_STATE_LISTEN) ||
|
|
(tmpstate == HAL_I2C_STATE_BUSY_TX_LISTEN) ||
|
|
(tmpstate == HAL_I2C_STATE_BUSY_RX_LISTEN))
|
|
{
|
|
/* Disable all interrupts, except interrupts related to LISTEN state */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_RX_IT | I2C_XFER_TX_IT);
|
|
|
|
/* keep HAL_I2C_STATE_LISTEN if set */
|
|
hi2c->State = HAL_I2C_STATE_LISTEN;
|
|
hi2c->XferISR = I2C_Slave_ISR_IT;
|
|
}
|
|
else
|
|
{
|
|
/* Disable all interrupts */
|
|
I2C_Disable_IRQ(hi2c, I2C_XFER_LISTEN_IT | I2C_XFER_RX_IT | I2C_XFER_TX_IT);
|
|
|
|
/* If state is an abort treatment on going, don't change state */
|
|
/* This change will be do later */
|
|
if (hi2c->State != HAL_I2C_STATE_ABORT)
|
|
{
|
|
/* Set HAL_I2C_STATE_READY */
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
}
|
|
hi2c->XferISR = NULL;
|
|
}
|
|
|
|
/* Abort DMA TX transfer if any */
|
|
tmppreviousstate = hi2c->PreviousState;
|
|
if ((hi2c->hdmatx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_TX) || \
|
|
(tmppreviousstate == I2C_STATE_SLAVE_BUSY_TX)))
|
|
{
|
|
if ((hi2c->Instance->CR1 & I2C_CR1_TXDMAEN) == I2C_CR1_TXDMAEN)
|
|
{
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
|
|
}
|
|
|
|
if (HAL_DMA_GetState(hi2c->hdmatx) != HAL_DMA_STATE_READY)
|
|
{
|
|
/* Set the I2C DMA Abort callback :
|
|
will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
|
|
hi2c->hdmatx->XferAbortCallback = I2C_DMAAbort;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Abort DMA TX */
|
|
if (HAL_DMA_Abort_IT(hi2c->hdmatx) != HAL_OK)
|
|
{
|
|
/* Call Directly XferAbortCallback function in case of error */
|
|
hi2c->hdmatx->XferAbortCallback(hi2c->hdmatx);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
I2C_TreatErrorCallback(hi2c);
|
|
}
|
|
}
|
|
/* Abort DMA RX transfer if any */
|
|
else if ((hi2c->hdmarx != NULL) && ((tmppreviousstate == I2C_STATE_MASTER_BUSY_RX) || \
|
|
(tmppreviousstate == I2C_STATE_SLAVE_BUSY_RX)))
|
|
{
|
|
if ((hi2c->Instance->CR1 & I2C_CR1_RXDMAEN) == I2C_CR1_RXDMAEN)
|
|
{
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
|
|
}
|
|
|
|
if (HAL_DMA_GetState(hi2c->hdmarx) != HAL_DMA_STATE_READY)
|
|
{
|
|
/* Set the I2C DMA Abort callback :
|
|
will lead to call HAL_I2C_ErrorCallback() at end of DMA abort procedure */
|
|
hi2c->hdmarx->XferAbortCallback = I2C_DMAAbort;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Abort DMA RX */
|
|
if (HAL_DMA_Abort_IT(hi2c->hdmarx) != HAL_OK)
|
|
{
|
|
/* Call Directly hi2c->hdmarx->XferAbortCallback function in case of error */
|
|
hi2c->hdmarx->XferAbortCallback(hi2c->hdmarx);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
I2C_TreatErrorCallback(hi2c);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
I2C_TreatErrorCallback(hi2c);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief I2C Error callback treatment.
|
|
* @param hi2c I2C handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_TreatErrorCallback(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
if (hi2c->State == HAL_I2C_STATE_ABORT)
|
|
{
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->PreviousState = I2C_STATE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->AbortCpltCallback(hi2c);
|
|
#else
|
|
HAL_I2C_AbortCpltCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
else
|
|
{
|
|
hi2c->PreviousState = I2C_STATE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
#if (USE_HAL_I2C_REGISTER_CALLBACKS == 1)
|
|
hi2c->ErrorCallback(hi2c);
|
|
#else
|
|
HAL_I2C_ErrorCallback(hi2c);
|
|
#endif /* USE_HAL_I2C_REGISTER_CALLBACKS */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief I2C Tx data register flush process.
|
|
* @param hi2c I2C handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_Flush_TXDR(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* If a pending TXIS flag is set */
|
|
/* Write a dummy data in TXDR to clear it */
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) != RESET)
|
|
{
|
|
hi2c->Instance->TXDR = 0x00U;
|
|
}
|
|
|
|
/* Flush TX register if not empty */
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE) == RESET)
|
|
{
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_TXE);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief DMA I2C master transmit process complete callback.
|
|
* @param hdma DMA handle
|
|
* @retval None
|
|
*/
|
|
static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
|
|
{
|
|
I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
|
|
|
|
/* Disable DMA Request */
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
|
|
|
|
/* If last transfer, enable STOP interrupt */
|
|
if (hi2c->XferCount == 0U)
|
|
{
|
|
/* Enable STOP interrupt */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
|
|
}
|
|
/* else prepare a new DMA transfer and enable TCReload interrupt */
|
|
else
|
|
{
|
|
/* Update Buffer pointer */
|
|
hi2c->pBuffPtr += hi2c->XferSize;
|
|
|
|
/* Set the XferSize to transfer */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
}
|
|
|
|
/* Enable the DMA channel */
|
|
if (HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)hi2c->pBuffPtr, (uint32_t)&hi2c->Instance->TXDR, hi2c->XferSize) != HAL_OK)
|
|
{
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
|
|
}
|
|
else
|
|
{
|
|
/* Enable TC interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief DMA I2C slave transmit process complete callback.
|
|
* @param hdma DMA handle
|
|
* @retval None
|
|
*/
|
|
static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
|
|
{
|
|
I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
|
|
uint32_t tmpoptions = hi2c->XferOptions;
|
|
|
|
if ((tmpoptions == I2C_NEXT_FRAME) || (tmpoptions == I2C_FIRST_FRAME))
|
|
{
|
|
/* Disable DMA Request */
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_TXDMAEN;
|
|
|
|
/* Last Byte is Transmitted */
|
|
/* Call I2C Slave Sequential complete process */
|
|
I2C_ITSlaveSeqCplt(hi2c);
|
|
}
|
|
else
|
|
{
|
|
/* No specific action, Master fully manage the generation of STOP condition */
|
|
/* Mean that this generation can arrive at any time, at the end or during DMA process */
|
|
/* So STOP condition should be manage through Interrupt treatment */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief DMA I2C master receive process complete callback.
|
|
* @param hdma DMA handle
|
|
* @retval None
|
|
*/
|
|
static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
|
|
{
|
|
I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
|
|
|
|
/* Disable DMA Request */
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
|
|
|
|
/* If last transfer, enable STOP interrupt */
|
|
if (hi2c->XferCount == 0U)
|
|
{
|
|
/* Enable STOP interrupt */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_CPLT_IT);
|
|
}
|
|
/* else prepare a new DMA transfer and enable TCReload interrupt */
|
|
else
|
|
{
|
|
/* Update Buffer pointer */
|
|
hi2c->pBuffPtr += hi2c->XferSize;
|
|
|
|
/* Set the XferSize to transfer */
|
|
if (hi2c->XferCount > MAX_NBYTE_SIZE)
|
|
{
|
|
hi2c->XferSize = MAX_NBYTE_SIZE;
|
|
}
|
|
else
|
|
{
|
|
hi2c->XferSize = hi2c->XferCount;
|
|
}
|
|
|
|
/* Enable the DMA channel */
|
|
if (HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->RXDR, (uint32_t)hi2c->pBuffPtr, hi2c->XferSize) != HAL_OK)
|
|
{
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
|
|
}
|
|
else
|
|
{
|
|
/* Enable TC interrupts */
|
|
I2C_Enable_IRQ(hi2c, I2C_XFER_RELOAD_IT);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief DMA I2C slave receive process complete callback.
|
|
* @param hdma DMA handle
|
|
* @retval None
|
|
*/
|
|
static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
|
|
{
|
|
I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
|
|
uint32_t tmpoptions = hi2c->XferOptions;
|
|
|
|
if ((__HAL_DMA_GET_COUNTER(hi2c->hdmarx) == 0U) && \
|
|
(tmpoptions != I2C_NO_OPTION_FRAME))
|
|
{
|
|
/* Disable DMA Request */
|
|
hi2c->Instance->CR1 &= ~I2C_CR1_RXDMAEN;
|
|
|
|
/* Call I2C Slave Sequential complete process */
|
|
I2C_ITSlaveSeqCplt(hi2c);
|
|
}
|
|
else
|
|
{
|
|
/* No specific action, Master fully manage the generation of STOP condition */
|
|
/* Mean that this generation can arrive at any time, at the end or during DMA process */
|
|
/* So STOP condition should be manage through Interrupt treatment */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief DMA I2C communication error callback.
|
|
* @param hdma DMA handle
|
|
* @retval None
|
|
*/
|
|
static void I2C_DMAError(DMA_HandleTypeDef *hdma)
|
|
{
|
|
I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
|
|
|
|
/* Disable Acknowledge */
|
|
hi2c->Instance->CR2 |= I2C_CR2_NACK;
|
|
|
|
/* Call the corresponding callback to inform upper layer of End of Transfer */
|
|
I2C_ITError(hi2c, HAL_I2C_ERROR_DMA);
|
|
}
|
|
|
|
/**
|
|
* @brief DMA I2C communication abort callback
|
|
* (To be called at end of DMA Abort procedure).
|
|
* @param hdma DMA handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_DMAAbort(DMA_HandleTypeDef *hdma)
|
|
{
|
|
I2C_HandleTypeDef *hi2c = (I2C_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent); /* Derogation MISRAC2012-Rule-11.5 */
|
|
|
|
/* Reset AbortCpltCallback */
|
|
if (hi2c->hdmatx != NULL)
|
|
{
|
|
hi2c->hdmatx->XferAbortCallback = NULL;
|
|
}
|
|
if (hi2c->hdmarx != NULL)
|
|
{
|
|
hi2c->hdmarx->XferAbortCallback = NULL;
|
|
}
|
|
|
|
I2C_TreatErrorCallback(hi2c);
|
|
}
|
|
|
|
/**
|
|
* @brief This function handles I2C Communication Timeout.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param Flag Specifies the I2C flag to check.
|
|
* @param Status The new Flag status (SET or RESET).
|
|
* @param Timeout Timeout duration
|
|
* @param Tickstart Tick start value
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status,
|
|
uint32_t Timeout, uint32_t Tickstart)
|
|
{
|
|
while (__HAL_I2C_GET_FLAG(hi2c, Flag) == Status)
|
|
{
|
|
/* Check for the Timeout */
|
|
if (Timeout != HAL_MAX_DELAY)
|
|
{
|
|
if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
|
|
{
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
}
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief This function handles I2C Communication Timeout for specific usage of TXIS flag.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param Timeout Timeout duration
|
|
* @param Tickstart Tick start value
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_WaitOnTXISFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
|
|
{
|
|
while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXIS) == RESET)
|
|
{
|
|
/* Check if a NACK is detected */
|
|
if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check for the Timeout */
|
|
if (Timeout != HAL_MAX_DELAY)
|
|
{
|
|
if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
|
|
{
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
}
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief This function handles I2C Communication Timeout for specific usage of STOP flag.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param Timeout Timeout duration
|
|
* @param Tickstart Tick start value
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_WaitOnSTOPFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
|
|
{
|
|
while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
|
|
{
|
|
/* Check if a NACK is detected */
|
|
if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check for the Timeout */
|
|
if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
|
|
{
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief This function handles I2C Communication Timeout for specific usage of RXNE flag.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param Timeout Timeout duration
|
|
* @param Tickstart Tick start value
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_WaitOnRXNEFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
|
|
{
|
|
while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == RESET)
|
|
{
|
|
/* Check if a NACK is detected */
|
|
if (I2C_IsAcknowledgeFailed(hi2c, Timeout, Tickstart) != HAL_OK)
|
|
{
|
|
return HAL_ERROR;
|
|
}
|
|
|
|
/* Check if a STOPF is detected */
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == SET)
|
|
{
|
|
/* Check if an RXNE is pending */
|
|
/* Store Last receive data if any */
|
|
if ((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE) == SET) && (hi2c->XferSize > 0U))
|
|
{
|
|
/* Return HAL_OK */
|
|
/* The Reading of data from RXDR will be done in caller function */
|
|
return HAL_OK;
|
|
}
|
|
else
|
|
{
|
|
/* Clear STOP Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Clear Configuration Register 2 */
|
|
I2C_RESET_CR2(hi2c);
|
|
|
|
hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
|
|
/* Check for the Timeout */
|
|
if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
|
|
{
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief This function handles Acknowledge failed detection during an I2C Communication.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param Timeout Timeout duration
|
|
* @param Tickstart Tick start value
|
|
* @retval HAL status
|
|
*/
|
|
static HAL_StatusTypeDef I2C_IsAcknowledgeFailed(I2C_HandleTypeDef *hi2c, uint32_t Timeout, uint32_t Tickstart)
|
|
{
|
|
if (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
|
|
{
|
|
/* Wait until STOP Flag is reset */
|
|
/* AutoEnd should be initiate after AF */
|
|
while (__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF) == RESET)
|
|
{
|
|
/* Check for the Timeout */
|
|
if (Timeout != HAL_MAX_DELAY)
|
|
{
|
|
if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
|
|
{
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Clear NACKF Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
|
|
|
|
/* Clear STOP Flag */
|
|
__HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_STOPF);
|
|
|
|
/* Flush TX register */
|
|
I2C_Flush_TXDR(hi2c);
|
|
|
|
/* Clear Configuration Register 2 */
|
|
I2C_RESET_CR2(hi2c);
|
|
|
|
hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
|
|
hi2c->State = HAL_I2C_STATE_READY;
|
|
hi2c->Mode = HAL_I2C_MODE_NONE;
|
|
|
|
/* Process Unlocked */
|
|
__HAL_UNLOCK(hi2c);
|
|
|
|
return HAL_ERROR;
|
|
}
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Handles I2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
|
|
* @param hi2c I2C handle.
|
|
* @param DevAddress Specifies the slave address to be programmed.
|
|
* @param Size Specifies the number of bytes to be programmed.
|
|
* This parameter must be a value between 0 and 255.
|
|
* @param Mode New state of the I2C START condition generation.
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref I2C_RELOAD_MODE Enable Reload mode .
|
|
* @arg @ref I2C_AUTOEND_MODE Enable Automatic end mode.
|
|
* @arg @ref I2C_SOFTEND_MODE Enable Software end mode.
|
|
* @param Request New state of the I2C START condition generation.
|
|
* This parameter can be one of the following values:
|
|
* @arg @ref I2C_NO_STARTSTOP Don't Generate stop and start condition.
|
|
* @arg @ref I2C_GENERATE_STOP Generate stop condition (Size should be set to 0).
|
|
* @arg @ref I2C_GENERATE_START_READ Generate Restart for read request.
|
|
* @arg @ref I2C_GENERATE_START_WRITE Generate Restart for write request.
|
|
* @retval None
|
|
*/
|
|
static void I2C_TransferConfig(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode,
|
|
uint32_t Request)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
|
|
assert_param(IS_TRANSFER_MODE(Mode));
|
|
assert_param(IS_TRANSFER_REQUEST(Request));
|
|
|
|
/* update CR2 register */
|
|
MODIFY_REG(hi2c->Instance->CR2,
|
|
((I2C_CR2_SADD | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_AUTOEND | \
|
|
(I2C_CR2_RD_WRN & (uint32_t)(Request >> (31U - I2C_CR2_RD_WRN_Pos))) | I2C_CR2_START | I2C_CR2_STOP)), \
|
|
(uint32_t)(((uint32_t)DevAddress & I2C_CR2_SADD) |
|
|
(((uint32_t)Size << I2C_CR2_NBYTES_Pos) & I2C_CR2_NBYTES) | (uint32_t)Mode | (uint32_t)Request));
|
|
}
|
|
|
|
/**
|
|
* @brief Manage the enabling of Interrupts.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
|
|
* @retval None
|
|
*/
|
|
static void I2C_Enable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
|
|
{
|
|
uint32_t tmpisr = 0U;
|
|
|
|
if ((hi2c->XferISR == I2C_Master_ISR_DMA) || \
|
|
(hi2c->XferISR == I2C_Slave_ISR_DMA))
|
|
{
|
|
if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
|
|
{
|
|
/* Enable ERR, STOP, NACK and ADDR interrupts */
|
|
tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
|
|
}
|
|
|
|
if (InterruptRequest == I2C_XFER_ERROR_IT)
|
|
{
|
|
/* Enable ERR and NACK interrupts */
|
|
tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
|
|
}
|
|
|
|
if (InterruptRequest == I2C_XFER_CPLT_IT)
|
|
{
|
|
/* Enable STOP interrupts */
|
|
tmpisr |= (I2C_IT_STOPI | I2C_IT_TCI);
|
|
}
|
|
|
|
if (InterruptRequest == I2C_XFER_RELOAD_IT)
|
|
{
|
|
/* Enable TC interrupts */
|
|
tmpisr |= I2C_IT_TCI;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
|
|
{
|
|
/* Enable ERR, STOP, NACK, and ADDR interrupts */
|
|
tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
|
|
}
|
|
|
|
if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
|
|
{
|
|
/* Enable ERR, TC, STOP, NACK and RXI interrupts */
|
|
tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_TXI;
|
|
}
|
|
|
|
if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
|
|
{
|
|
/* Enable ERR, TC, STOP, NACK and TXI interrupts */
|
|
tmpisr |= I2C_IT_ERRI | I2C_IT_TCI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_RXI;
|
|
}
|
|
|
|
if (InterruptRequest == I2C_XFER_CPLT_IT)
|
|
{
|
|
/* Enable STOP interrupts */
|
|
tmpisr |= I2C_IT_STOPI;
|
|
}
|
|
}
|
|
|
|
/* Enable interrupts only at the end */
|
|
/* to avoid the risk of I2C interrupt handle execution before */
|
|
/* all interrupts requested done */
|
|
__HAL_I2C_ENABLE_IT(hi2c, tmpisr);
|
|
}
|
|
|
|
/**
|
|
* @brief Manage the disabling of Interrupts.
|
|
* @param hi2c Pointer to a I2C_HandleTypeDef structure that contains
|
|
* the configuration information for the specified I2C.
|
|
* @param InterruptRequest Value of @ref I2C_Interrupt_configuration_definition.
|
|
* @retval None
|
|
*/
|
|
static void I2C_Disable_IRQ(I2C_HandleTypeDef *hi2c, uint16_t InterruptRequest)
|
|
{
|
|
uint32_t tmpisr = 0U;
|
|
|
|
if ((InterruptRequest & I2C_XFER_TX_IT) == I2C_XFER_TX_IT)
|
|
{
|
|
/* Disable TC and TXI interrupts */
|
|
tmpisr |= I2C_IT_TCI | I2C_IT_TXI;
|
|
|
|
if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN)
|
|
{
|
|
/* Disable NACK and STOP interrupts */
|
|
tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
|
|
}
|
|
}
|
|
|
|
if ((InterruptRequest & I2C_XFER_RX_IT) == I2C_XFER_RX_IT)
|
|
{
|
|
/* Disable TC and RXI interrupts */
|
|
tmpisr |= I2C_IT_TCI | I2C_IT_RXI;
|
|
|
|
if (((uint32_t)hi2c->State & (uint32_t)HAL_I2C_STATE_LISTEN) != (uint32_t)HAL_I2C_STATE_LISTEN)
|
|
{
|
|
/* Disable NACK and STOP interrupts */
|
|
tmpisr |= I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
|
|
}
|
|
}
|
|
|
|
if ((InterruptRequest & I2C_XFER_LISTEN_IT) == I2C_XFER_LISTEN_IT)
|
|
{
|
|
/* Disable ADDR, NACK and STOP interrupts */
|
|
tmpisr |= I2C_IT_ADDRI | I2C_IT_STOPI | I2C_IT_NACKI | I2C_IT_ERRI;
|
|
}
|
|
|
|
if (InterruptRequest == I2C_XFER_ERROR_IT)
|
|
{
|
|
/* Enable ERR and NACK interrupts */
|
|
tmpisr |= I2C_IT_ERRI | I2C_IT_NACKI;
|
|
}
|
|
|
|
if (InterruptRequest == I2C_XFER_CPLT_IT)
|
|
{
|
|
/* Enable STOP interrupts */
|
|
tmpisr |= I2C_IT_STOPI;
|
|
}
|
|
|
|
if (InterruptRequest == I2C_XFER_RELOAD_IT)
|
|
{
|
|
/* Enable TC interrupts */
|
|
tmpisr |= I2C_IT_TCI;
|
|
}
|
|
|
|
/* Disable interrupts only at the end */
|
|
/* to avoid a breaking situation like at "t" time */
|
|
/* all disable interrupts request are not done */
|
|
__HAL_I2C_DISABLE_IT(hi2c, tmpisr);
|
|
}
|
|
|
|
/**
|
|
* @brief Convert I2Cx OTHER_xxx XferOptions to functional XferOptions.
|
|
* @param hi2c I2C handle.
|
|
* @retval None
|
|
*/
|
|
static void I2C_ConvertOtherXferOptions(I2C_HandleTypeDef *hi2c)
|
|
{
|
|
/* if user set XferOptions to I2C_OTHER_FRAME */
|
|
/* it request implicitly to generate a restart condition */
|
|
/* set XferOptions to I2C_FIRST_FRAME */
|
|
if (hi2c->XferOptions == I2C_OTHER_FRAME)
|
|
{
|
|
hi2c->XferOptions = I2C_FIRST_FRAME;
|
|
}
|
|
/* else if user set XferOptions to I2C_OTHER_AND_LAST_FRAME */
|
|
/* it request implicitly to generate a restart condition */
|
|
/* then generate a stop condition at the end of transfer */
|
|
/* set XferOptions to I2C_FIRST_AND_LAST_FRAME */
|
|
else if (hi2c->XferOptions == I2C_OTHER_AND_LAST_FRAME)
|
|
{
|
|
hi2c->XferOptions = I2C_FIRST_AND_LAST_FRAME;
|
|
}
|
|
else
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_I2C_MODULE_ENABLED */
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|